Setup MenuENGLISH12ENGLISHSetting the High Pass FilterSet this to “ON” if your speakers do not have a very strong capacityfor producing low bass.Pressor[DD HH]to select “H. P. F.”, thenpressENTER.2Useor press[FF GG]to set.ON:Using the high pass filter makes it possible to reduce distortion ofthe bass sound.3PressENTER.Canceling setup menu:To cancel the setup menu pressMENU.4OFF:Select this when not using a high pass filter.OperationPlaying the input sourceUseFUNCTIONto select the input source you want toplay.UseVOLUMEto adjust the volume.• The volume level is displayed on the volume level display.13Start playback on the selected component.For operating instructions, refer to the component’s manual.2Before operatingTurning the sound off temporarily (MUTING)Press[MUTING].• Canceling MUTING mode:To cancel the muting mode, either press[MUTING]or adjust thevolume.Connect the headphones to.• No sound is produced from the speakers automatically.NOTE:• To prevent hearing loss, be careful not to raise the volume levelexcessively when using headphones.Listening over headphonesSwitching the speakersPressto turn the corresponding speaker pairon.Pressor[POWER ON].• The power indicator blinks green and the power turns on.Press.£OFF:The power turns off and the indicator is off.¢ON:The power indicator lights red.14Set[MODE SELECTOR 1]to “A”.2Set[MODE SELECTOR 2]to “CD/iPod”.3PressMENUwith the function set to something other“FM/AM”, “XM” or the function selected at “iPodAssignment”.1SystemSetup1SystemSetupH.P.F.2H.P.F.ON/OFF:OFF3