Denon DVD-2910 Operating Instructions Manual

Also see for DVD-2910: Specifications Supplementary guide Operating instructions Service manual Operating instructions

23ENGLISH23In the stop mode, press the SETUP button.• The setup (default settings) screen appears.NOTE: For some menus, the initial values can be changedduring playback.LANGUAGE SETUPUse this to set the language to be used when playing thedisc. If the set language is not offered on that disc, the discsdefault language is set.And use this to set the language for the default setting screenand messages displayed on the TV screen (“PLAY”, etc.).DIGITAL INTERFACE SETUPUse this to set the output of DVI and HDMI terminals.VIDEO SETUPUse this to set the DVD-2910/955’s screen mode. (TV aspectand TV type.)AUDIO SETUPUse this to set the DVD-2910/955’s audio output mode.(Digital and LPCM output settings.)RATINGSUse this to disable playback of adult DVDs so that childrencannot watch them. Note that playback of adult DVDs cannotbe disabled if the rating level is not recorded on the DVD.OTHER SETUPThese include special settings such as CAPTIONS, WALLPAPER , etc,.Use the 0 and 1 cursor buttons to select the desired settingitem, then press the ENTER button.Select “LANGUAGE SETUP”. (See page 26.)Select “DIGITAL INTERFACE SETUP”. (See page 29.)Select “VIDEO SETUP”. (See page 32.)Select “AUDIO SETUP”. (See page 34.)Select “RATINGS”. (See page 39.)Select “OTHER SETUP”. (See page 41.)L ANGUAGE SE TUPSE L ECT : DEC I S I ON : ENTER BUT TOND I AL OGD I SC MENUSOSD LANGUAGEE X I T SE TUPSUBT I TL EENGL I SHOFFENGL I SHENGL I SH8 CHANGING THE DEFAULT SETTINGSSETUPRemote control unitRemote control unit✽ To exit the setup modeUse the ª cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUPbutton on the remote control unit.1Turn on the power.• Press the power button, the power indicator lights greenand the power turns on.When pressed again, the power turns off and indicator isoff.• In the standby mode (the power indicator lights red), pressthe ON/STANDBY button on the main unit or POWER ONbutton on the RC-985.ON / STANDBYMain unit2 Make the initial settings to suit your usage conditions before starting playback.The initial settings are retained until they are next changed, even if the power is turned off.Remote control unit(Green)ON / STANDBYMain unit Remote control unitPOWER ON(Red)SELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEMARKERRANDOMDIMMERZOOMPICUREADJUSTSETUPMEMORYA-BREPEATSELECTRC-985PURE DIRECTDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPPOWER OFFPOWER ON132ON / STANDBY1 1