Denon DVD-2910 Operating Instructions Manual

Also see for DVD-2910: Specifications Supplementary guide Operating instructions Service manual Operating instructions

33ENGLISH3w When “TV TYPE” is selected:NTSCSelect this when your TV’s video format is NTSC.If NTSC is selected, output format is fixed to NTSC.PALSelect this when your TV’s video format is PAL.If PAL is selected, output format is fixed to PAL.MULTI (Factory default)Select this when your TV is compatible with both the NTSC and PALformats.NTSC signals are output from the video output jacks when discsrecorded in NTSC format are played, and PAL signals are output fromthe video output jacks when discs recorded in PAL format are played.e When “VIDEO OUT” is selected: (NOTES)PROGRESSIVE (Factory default)Select this when using the DVD-2910/955 connected to aprogressive type TV.INTERLACEDSelect this when using the DVD-2910/955 connected to an interlacetype TV.NOTE:• For the component output only, it is possible to switch betweeninterlace image output and progressive image output. It is notpossible to specify progressive image output for the Video outputconnector or S-Video output connector.r When “PROGRESSIVE MODE” is selected:AUTO 1 (Factory default)Select this when the image recorded to the DVD is film material.AUTO 2Select this when the image recorded to the DVD is 30-frame filmmaterial.VIDEO 1 TO 3Select this when the image recorded to the DVD is video material.VIDEO 1Select this for regular video material.VIDEO 2Select this for video material having little movement.VIDEO 3Select this for video material having a lot of movement.Remote control unit Remote control unitE X I T SE TUPPROGRE SS I VE MODEV I DEO SE TUPTV ASPECTTV TYPEV I DEO OUTNTSCPALMUL T ISQUEE Z E MODEDEC I S I ON : ENTER BUT TONSE L ECT :E X I T SE TUPPROGRE SS I VE MODEV I DEO SE TUPTV ASPECTTV TYPEV I DEO OUTAUTO1AUTO2V I DEO1V I DEO2V I DEO3SQUEE Z E MODEDEC I S I ON : ENTER BUT TONSE L ECT :E X I T SE TUPPROGRE SS I VE MODEV I DEO SE TUPTV ASPECTTV TYPEV I DEO OUTOFFONSQUEE Z E MODEDEC I S I ON : ENTER BUT TONSE L ECT :E X I T SE TUPPROGRE SS I VE MODEV I DEO SE TUPTV ASPECTTV TYPEV I DEO OUT PROGRESS I VEI NTERL ACEDSQUEE Z E MODEDEC I S I ON : ENTER BUT TONSE L ECT :t When “SQUEEZE MODE” is selected:OFF (Factory default)Select this to display without changing the screen size.ONSelect this when playing back a 4:3 image that you wishto display at 4:3 aspect ratio at the center of a 16:9 TV.✽ Only effective for set to “WIDE (16:9)” at “TV ASPECT”.(See page 32.)✽ No effective for interlaced image.✽ To exit the setup modeUse the ª cursor button to select “EXIT SETUP”,then press the ENTER button. It is also possibleto quit by pressing the SETUP button on theremote control unit.TVTV