Denon DVD-3910 Operating Instructions Manual

Also see for DVD-3910: Supplementary guide Operating instructions Specifications Specification Service manual

41ENGLISH3w When “DIGITAL OUT” is selected:NORMAL (Factory default)When playing DVDs recorded in Dolby Digital or DTS, bitstream signalsare output from the digital audio output terminals. When playing DVDsrecorded in linear PCM or packed PCM, linear PCM signals are output.Select “NORMAL” when making digital connections to an AV amplifierwith built-in Dolby Digital and DTS decoder.PCMWhen playing Dolby Digital/DTS bitstream signals or DVDs recorded inlinear PCM or packed PCM, the signals are converted into 48 kHz/16-bit PCM (2-channel) signals and output from the digital outputs. Whenplaying DVDs recorded in PCM, linear PCM signals are output.e When “LPCM (44.1 kHz/ 48 kHz)” is selected:OFF (Factory default)When playing linear PCM or packed PCM DVDs that are not copyright-protected, for 2-channel PCM audio signals up to 96 kHz, linear PCMsignals are output as such without being converted from the digitaloutputs. (176.2 kHz and 192 kHz signals are converted to 88.2 kHz and96 kHz, respectively.)For DVDs containing multi-channel PCM signals, the digital signals aredown-mixed for output into two channels, front left and right. (Only thefront left and right channels are output for sources for which down-mixing is prohibited.)When playing copyright-protected linear PCM or packed PCM DVDs, inconsideration of copyrights, no digital signals are output for sourcesexceeding 48 kHz/16 bits. When playing such sources, either set to“ON” or make analog connections. (See page 14.)ONLinear PCM and packed PCM signals are converted to 44.1 kHz or 48kHz and output. (The PCM digital audio output signals are converted to48 kHz or less in consideration of copyrights.) When making digitalconnections to an AV amplifier that is not compatible with 96 kHz/88.2kHz signals, set to “ON”.r When “SOURCE DIRECT” is selected:OFF (Factory default)Please set to OFF when performing speaker settings or setting thedelay time and playing back.ONSet to ON when playing back without performing the processing ofspeaker settings. Performing this setting will result in the setting ofthe DTS recommended all-channel, full bandwidth playback. (Notethat the volume of the sub woofer will increase by 5 dB, and therewill be an increase of 15 dB with a Super Audio CD.) This is also setwhen playing back a 6-channel source of DVD audio that has beenrecorded with all channels and full bandwidth. When set to “OFF”,the speaker size will be set to “Large” for all speakers and the subwoofer will be set to “Yes”. When playing back software such asthis, perform the analog connections according to the softwareinstruction manual.t When “BASS ENHANCER” is selected:OFF (Factory default)No sound is produced from the subwoofer.ONSound is produced from the subwoofer.In the case, set the subwoofer to “YES” at the speaker settings.✽ This works only with analog audio output.✽ This does not work at “SOURCE DIRECT” is on.AUD I O SE TUPAUD I O CHANNE LD I G I TAL OUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :ONOF FAUD I O SE TUPAUD I O CHANNE LD I G I TAL OUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :ONOF FRemote control unit Remote control unitAUD I O SE TUPAUD I O CHANNE LD I G I TAL OUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :NORMALPCMAUD I O SE TUPAUD I O CHANNE LD I G I TAL OUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :OF FON