Denon DVD-3910 Operating Instructions Manual

Also see for DVD-3910: Supplementary guide Operating instructions Specifications Specification Service manual

53ENGLISHON / STANDBYSUPERAUDIO CDSETUPSELECT FORMATPUREDIRECTSELECTVIDEO MODEPUSH ENTERHDMI / DVIDVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-3910STILL / PAUSEPLAY STOPOPEN/CLOSEDENON LINK AL 24 PLUS1 2 3, 412 USING THE VIDEO SETUP2 The video output setting of the HDMI and the DVI-D connectors can be changed.2 The video output setting of the PICTURE MODE, PROGRESSIVE MODE and ADJUST MODE also can be changed.1Press the HDMI/DVI SELECT button.• The modes described below will appear on the display.HDMI/DVI OFF (Factory default)No output signals from the HDMI and DVI-Dconnectors.This mode is set to use the COMPONENT VIDEOOUT connector.HDMI Y Cb CrOutputs the component signals from the HDMIconnector.HDMI RGBOutputs the RGB signals from the HDMI connector.DVIOutputs the RGB signals from the DVI-D connector.✽ The video signals are only output from one of theHDMI, DVI or progressive component video outputconnectors.Main unitSELECT FORMATHDMI / DVIDisplay the setting mode✽ The HDMI, DVI, 480P, 576P, 720P and 1080i indicators flashwhen the connection is being checked, then stop flashing,remaining lit, once the check is completed.HDMI Y Cb CrHDMI R G BDVI2Press the HDMI/DVI FORMAT button.• The modes described below will appear on the display.Select the item you wish to set and press the selectknob to define it.480P/576P (Factory default)Outputs the image from the HDMI or DVI-D connectorat 480P or 576P.720POutputs the image from the HDMI or DVI-D connectorat 720P.1080iOutputs the image from the HDMI or DVI-D connectorat 1080i.• When playing back a PAL-formatted disc, be sure toset the TV TYPE option to NTSC. (See pages 36, 37.)• The video or audio signals may be interrupted whenthe output setting mode is switched.• Depending on the TV you are using, if the TV's inputis not set to HDMI or DVI, the HDMI or DVI OFFmode may be set. In this case, set the TV's inputsetting to HDMI or DVI before performing the DVIsetup procedure.• Connect to an HDCP compatible display to viewimages with DVI connections.HDMI/DVI OFFMain unitSELECT FORMATHDMI / DVI480P/576P720P1080iRemote control unitSELECT FORMATHDMI / DVIRemote control unitSELECT FORMATHDMI / DVISELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLE DISPLAYTOP MENURETURNPLAYBACK LIGHTPOWER OFFPOWER ON1 2