49ENGLISHSELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEMARKERRANDOMDIMMERZOOMPICUREADJUSTSETUPMEMORYA-BREPEATSELECTRC-972PURE DIRECTDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPBACK LIGHTPOWER OFFPOWER ON2, 3, 4, 5, 6, 7111 ADJUSTING THE PICTURE QUALITY1Press the PICTURE ADJUST button during playback orduring pause.• The image quality adjustment screen will appear.STDReturns the settings to the factory default settings.M1 TO M5Image quality settings that have been adjusted to yourpreference can be stored to 5 memories, M1 to M5.SETSET permits set to setup level and setting of thescreen display position (horizontal and vertical).Remote control unitPICTUREADJUSTP I CTURE MODESTD M1 M2 M3 M4 M5 SET2Select the memory using the 2 cursor buttons (0, 1) andpress the ENTER button.IMAGE QUALITY ADJUSTMENT 1This permits adjustment of the contrast, brightness,sharpness, tint, and CCS (cross color suppression). /Advance to Operation 3IMAGE QUALITY ADJUSTMENT 2This permits adjustment of the setup level, whitelevel, color density, chroma delay, and NOISEREDUCTION. / Advance to Operation 4.ENHANCER (ADJUSTMENT 3)This permits adjustment of the enhancer. /Advance to Operation 5.GAMMA CORRECTIONThis is selected when dark portions of the image areobscure, or bright portions are much brighter thannecessary. / Advance to Operation 6.Remote control unit3When Image Quality Adjustment 1 Is Selected andAdjusted:• Press cursor button (ª), then select the image qualityadjustment item with cursor buttons (0, 1), set theadjustment value with cursor buttons (•, ª), and pressthe ENTER button.• All of the adjusted contents will be stored.CONTRAST (–6 to +6) (Factory default: 0)• This adjusts the light/dark difference of the image.BRIGHTNESS (0 to +12) (Factory default: 0)• This adjusts the brightness of the image. Remote control unitMEMORY 1 1 2 30 0 0 0 0M H0MEMORY 1 1 2 30 0 0M H0 0 0