Denon DVD-9000 Operating Instructions Manual

Also see for DVD-9000: Setup guide Specifications Specifications Operating lnstructions Service manual

ENGLISH175 PART NAMES AND FUNCTIONS(1) Front PanelSee page 3.q Power button• Press once to turn the power on.• Press again to set to the “OFF” position and turn thepower off.• Set the power to the standby mode by pressing thePOWER OFF button on the remote control unit while thepower is on.• Turn the power on from the standby mode by pressing thePOWER ON button on the remote control unit.w Power indicator• This indicator lights when the power is on and when thepower is in the standby mode.e AL24 PLUS indicator• This indicator lights when the audio signals of a DVD, etc.,are being processed digitally with the AL24 processingPlus, a newly developed analog waveform reproductiontechnology.r DVD AUDIO indicator• This indicator lights when playing discs recorded in DVDaudio format.t Disc tray• Load discs here. (See page 41.)• Press the OPEN/CLOSE button !4 to open and close thedisc tray.• The disc tray is also closed when the PLAY button y ispressed.y PLAY button• Press this button to play the disc. (See page 42.)u STOP button• Press this to stop the disc. (See page 43.)i Skip button (8)• Press this to move back to the beginning of the currenttrack (or chapter).• Press again to move back to the beginning of the previoustrack (or chapter). (See page 44.)o Skip button (9)• Press this to move ahead to the beginning of the nexttrack (or chapter). (See page 44.)!0 PURE DIRECT selector• Use this to select modes with specific movie signal anddigital audio signal output settings.!1 SOURCE selector• Use this to select the program source for output.DVD : The signals of the disc being played on theDVD-9000 are output.OPTICAL : The program source connected to theOPTICAL digital input connector is output.COAXIAL : The program source connected to theCOAXIAL digital input connector is output.• The program source selected with this selector is alsooutput to the digital output connector.!2 Remote control sensor!3 Display• Information on the disc that is currently playing is shownon the display. (See page 18.)!4 OPEN/CLOSE button (5)• Press this button to open and close the disc tray.(See page 41.)