Denon DVD-A1UD Owner's Manual

Also see for DVD-A1UD: Dimensions

Contents

Denon DVD-A1UD Owner's Manual Manual pdf 21 page image

TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started SpecificationsENGLISHConnection to an AV Amp with No HDMI Audio InputWhen playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, the DVD-A1UD outputs Dolby Digital or DTS bitstream from its digital audio output terminal."6%*0$0"9*"-*/*/015*$"-AV AmpNOTEDolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output withthis connection.When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, doso with an HDMI connection (vpage 13, “Using an HDMI Cable to Connectto an AV Amp or Television”).Super Audio CD’s DSD signal cannot be output. Also, during CD layerplayback, 44.1 kHz/16-bit Linear PCM is output.••Do not output DTS audio signals to an AV Amp that does not support DTS. Playing back a BD/DVDdisc with recorded DTS content can generate noise and even damage your speakers.When connecting with an optical transmission cable (sold separately), make sure the plug shapealigns with the socket, and insert fully.••Match theshapes1. Home Theater Playback – Playing Back Using Multi-channel System –Audio Signal from the Digital Audio Output (Optical/Coaxial) TerminalThe DVD-A1UD can convert and output digital audio signal format recorded on media.Convert the digital audio signal in accordance with the specifications of the device that is to input digitalaudio output signals from the DVD-A1UD.Media/Files Audio formatSetting “Audio Setup” – “Digital Out” (vpage 29) onthe GUI menuBitstream PCM/PCM Down SamplingBDDolby DigitalDolby Digitalz12 ch Downmix LPCMDolby Digital PlusDolby TrueHDDTS DTSz1DTS-HDLPCM 2 ch Downmix LPCMz1AVCHD Dolby Digital Dolby DigitalLPCM 2 ch Downmix LPCMDVD-VideoDolby Digital Dolby DigitalDTS DTSLPCM, MPEG 2 ch Downmix LPCMDVD-Audio LPCM, PPCMSuper Audio CDMulti area Audio is not outputStereo areaCD layer 2 ch LPCMDivX® Dolby Digital Dolby Digital 2 ch Downmix LPCMMP3, MP22 ch LPCMCDMP3, WMA, AAC, LPCMDTS-CD DTS 2 ch Downmix LPCM(DTSz2)z1 : Bitstream signals are output in accordance with the BD re-encode setting when “BD Audio Mode”is set to “Mix Audio Output” (vpage 33).z2 : When “HDMI Setup” – ”Audio Setup” is set to “Auto” on the GUI menu and bit stream is output fromHDMI , the DTS bit stream is output from the digital audio output (optical/coaxial) as well.For content with copyright protection, audio signal is down sampled to 48kHz 16bit and is output.Connections