Denon DVD-A1UD Owner's Manual

Also see for DVD-A1UD: Dimensions

Contents

Denon DVD-A1UD Owner's Manual Manual pdf 34 page image

TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Specifi cationsENGLISH0Setting items Setting contentsDENON LINK ModeSet the audio output ofDENON LINK.GOffH : Do not use DENON LINK.G2ndH : Output digital audio using DENON LINK 2nd Edition.G3rdH : Output digital audio using DENON LINK 3rd Edition.G4thH : Output digital audio using DENON LINK 4th Edition.Compatible with jitter-free connection. For more information, refer to“DENON LINK Connection q Making a Jitter-free Connection” (vpage18).HDMI 1 : Improve HDMI1 digital signal jitter.HDMI 2 : Improve HDMI2 digital signal jitter.When set to “4th”, the HDMI control function becomes available fromthe connected device.When “4th” is set and jitter-free connection is set up, audio affectedby the jitter-free function is output from the HDMI terminal duringBD playback. When playing back media other than that, video signalis output from the HDMI terminal and audio signal is output from theDENON LINK terminal, respectively.To play DENON LINK 4th signals, connect to a DENON LINK 4th-compatible AV Amp using an HDMI and a DENON LINK cable.About the 4th setting of the AV Amp, see the owner's manual of theAV Amp.••••••Set the audio signal to be output from the DENON LINK terminal.Audio SetupDENON LINK Setup Default settings are underlined.Setting items Setting contentsXLRSet the signal to be outputfrom the XLR terminal.GTerminal PolarityH : Set the polarity of the XLR terminal.Normal : Normal polarity.Inversion : Reverse the polarity.GGain UpH : Can increase output gain when the input sensitivity of adevice connected via XLR is low.Off : Outputs at standard gain from the XLR terminal.On : Increase the output gain of the XLR terminal. Set when the inputsensitity of the connected device is low.The default DVD-A1UD balance model XLR audio connectors pinalignment is as shown.q GROUND w HOT e COLD••••Setting items Setting contentsUser Preset 1/User Preset 2This sets the operating modefor “User Preset 1” or “UserPreset 2” selected by .Setting each of these itemsto “Off” enables output ofhigh quality analog signalsfree of interference from theassociated circuits.GDigital OutH : Set whether to output signals to the digital audio outputterminal.On : Enable digital audio output.Off : Disable digital audio output.GVideo OutH : Set option of video output.On : Enable video output.Off : Disable video output. This setting also disables audio output fromthe HDMI terminal.GDisplayH : Set option for front panel display.On : Turn on display.Off : Turn off display.For more information, see “Playing Back High-quality Audio (Pure DirectFunction)” (vpage 40).••••••Makes settings regarding digital audio and video output modes during Pure Direct mode,as well as display messages. Two types of setting can be registered.Pure Direct Setup Default settings are underlined.Signals Compatible with DENON LINK Setting and TransmissionThe DENON LINK setting for the DENON LINK version of the connected AV Amp is as follows:DENON LINK version ofAV AmpThe DENONLINK settingof the DVD-A1UDMediaBD(Duringjitter-freeconnection)DVD-VideoDVD-AudioSuperaudioCDCD SD2nd Edition(“S.E.” displayed nearterminal)“2nd” A S S A S S3rd Edition(“3rd” displayed nearterminal)“3rd” A S S S S S4th Edition(“4th” displayed nearterminal)“4th” S S S S S SnNOTEWith DENON LINK connections, no audio signals other than those of BD are output from the HDMIterminal.(When “DENON LINK Mode” is set to “2nd” and “HDMI Setup” – “SA-CD Audio Out” (vpage 26) is setto “On”, the audio signals of Super Audio CD are output from the HDMI terminal.)Remote control operationbuttons :Displaying the menuCancel the menu :Moves the cursor(Up/Down/Left/Right) :Decision the setting :Return to previous menuSetup