Denon DVD-A1UD Owner's Manual

Also see for DVD-A1UD: Dimensions

Contents

Denon DVD-A1UD Owner's Manual Manual pdf 39 page image

ENGLISHTroubleshootingInformationHDMI Control FunctionPlaybackSetupConnectionsGetting Started SpecificationsSetupSetting items Settingcontents DefaultDNRReduce noise in the entirepicture.0 ~ +3 0ContrastAdjust picture contrast. –6 ~ +6 0BrightnessAdjust picture brightness. 0 ~ +12 0EnhancerStrengthens the contours ofthe picture.0 ~ +11 0Gamma CorrectionAdjust video brightness indetail. G0 ~ 9G0 = 24 / G1 = 32G2 = 48 / G3 = 64G4 = 80 / G5 = 96G6 = 128 / G7 = 160G8 = 192 / G9 = 224Sharpness (medium range)z1Adjust picture sharpnessfor the medium frequencyrange.–6 ~ +6 0Sharpness (high range)Adjust picture sharpness forthe higher frequency range.–6 ~ +6 0Hue (color tone)Adjust the green and redcolor balance.–6 ~ +6 0White LevelAdjust the white level. –5 ~ +5 0Black LevelAdjust the black level. –5 ~ +5 0Chroma LevelAdjust the color density. –6 ~ +6 0Setup Levelz2Adjust the black areas of theimage.0 IRE7.5 IRE 0 IREH.PositionAdjust the left/right position. –7 ~ +7 0V.PositionAdjust the top/bottomposition.–7 ~ +7 0z1：This is not available for HDMI output.z2： Effective only for the 480i video signal from the video output terminal, Svideo output terminal, and component video output terminal.You can adjust the picture quality to your liking.You can store up to a maximum of 5 values in memory.When Finishing Picture AdjustmentPress during picture adjustment.When Outputting Standard Picture Quality withoutUsing Picture AdjustmentPress and to select “Standard” and then press .nnAbout Gamma CorrectionWhen you select “Gamma Correction”, and then press , you canchange the setting with .In the example of the graph below, the horizontal axis shows thebrightness level of the pictured recorded on the disc. The vertical axisshows the brightness of the picture output by the DVD-A1UD.Gamma CorrectionMemory 500255255G0:024On adjusting the brightness on the output side of bright parts onthe disc side, the normally hard to see bright parts become clearlydiscernible images.Gamma CorrectionMemory 500255255G0:024On adjusting the brightness on the output side of dark parts onthe disc side, the normally hard to see dark parts become clearlydiscernible images.Resuming Initial Values after Gamma CorrectionPress while a graph is displayed.••nThe picture adjustment set values are retained in memory even afterthe power is turned off.Adjusting the Picture Quality (Picture Control)1 Press .The currently set status is displayed.2 Select the memory number you want (“Memory 1” ~“Memory 5”) with , and then press .StandardMemory 1Memory 5PICT3 Select the item you want to changewith .Memory 1DNRContrastV.Position0004 Change the setting with .Refer to the table on the right regarding contents of items whichcan be set.b