12ConnectionsENGLISHConnectionsENGLISH*1If “BD Audio Mode” is set to “Mix Audio Output” audio will be output as Multi LPCM. Refer to page 23.*2Outputs audio signals decoded from independent substream.*3Outputs audio signals decoded from Dolby TrueHD audio stream.*4For DTS-HD Master Audio, outputs audio signals decoded from DTS-HD audio stream, and forDTS-HD High Resolution Audio, outputs audio signals decoded from DTS core stream.• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as MultiLPCM or 2ch Downmix LPCM depends on the capability of the connected device even if you select“HDMI Multi(Normal)” in“HDMI Audio Out” setting. Refer to page 32.* HDMI: High-Definition Multimedia Interface Audio signals output from DIGITAL OUT (OPTICAL/COAXIAL)When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output fromthe HDMI OUT will be output from the DIGITAL OUT jack as well, except that Dolby Digital signal will beoutput instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.< When HDMI is not connected or “Audio Mute” is selected···>When HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting, the audio signalsoutput from DIGITAL OUT changes depending on the “Digital Out” setting. Refer to the following table.To set “Digital Out”, press [SETUP], then select “Quick” A “HDMI Audio Out” A “Audio Mute” or“Custom” A “Audio” A “HDMI Audio Out” A “Audio Mute”.*1 When “BD Audio Mode” is set to “Mix Audio Output”, “HDMI Audio Out” is set to “Audio Mute” and“Digital Out” is set to “Bitstream”, those audio will be output as Dolby Digital.• This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting.Copyright protection systemTo play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that boththe unit and the display device (or an AV amplifier) support a copyright protection system calledHDCP (high-bandwidth digital content protection system). HDCP is copy protection technology thatcomprises data encryption and authentication of the connected AV device. This unit supports HDCP.Please read the operating instructions of your display device or AV amplifier) for more information.Note• When using HDCP-incompatible display device, the image will not be viewed properly.• Among the devices that support HDMI, some devices can control other devices via the HDMIjack, this unit cannot be controlled by another device via the HDMI jack.• The audio signals from the HDMI jack (including the sampling frequency, the number ofchannels and bit length) maybe limited by the device that is connected.• Among the monitors that support HDMI, some do not support audio output (e.g, projectors). Inconnections with device such as this unit, audio signals are not output from the HDMI output jack.Digital Connection to an AV Amplifier with Built-in DecoderRS-232CSTRAIGHT CABLEIN OUTROOM TO ROOMREMOTE CONTROLCOMPONENT VIDEO OUTVIDEO OUT7.1ch AUDIO OUTOPTICALDIGITAL OUT ( PCM / BITSTREAM )COAXIAL2ch AUDIO OUTFRSW SR SL SBR SBLCFLS VIDEO OUTHDMI OUTY P B /C B PR /C ROPTICALDIGITAL OUT ( PCM / BITSTREAM )COAXIALCOAXIALDIGITAL AUDIO INPUTOPTICALDIGITAL AUDIO INPUTaudiothis unitordigital audio coaxial/optical cabledigital audio coaxial/optical input jackDisc type Audio recording format “Digital Out” settingBitstream LPCMBD-videoDolby Digital Dolby Digital 2ch Downmix LPCMDolby Digital Plus Dolby Digital 2ch Downmix LPCMDolby TrueHD Dolby Digital 2ch Downmix LPCMDTS DTS*1 2ch Downmix LPCMDTS-HD DTS*1 2ch Downmix LPCMLPCM 2ch Downmix LPCM*1 2ch Downmix LPCMBD-RE/BD-R AAC 2ch Downmix LPCM 2ch Downmix LPCMLPCM 2ch Downmix LPCM 2ch Downmix LPCMDVD-videoDolby Digital Dolby Digital 2ch Downmix LPCMDTS DTS 2ch Downmix LPCMLPCM 2ch Downmix LPCM 2ch Downmix LPCMDivX® Dolby Digital Dolby Digital 2ch Downmix LPCMMP3/MP2 2ch LPCM 2ch LPCMaudio CD/ MP3/Windows Media™ Audio 2ch LPCM 2ch LPCMDTS-CD DTS 2ch Downmix LPCMNote• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.Note for Optical Cable• Optical cable may be damaged when bent at sharp angles. Ensure cables are coiled in loops witha diameter of 6 inches (15cm) or more when storing them.• Use a cable which is 9.8 feet (3m) or shorter.• Insert cable plugs firmly into the jacks when making connections.• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a jack.Cables not included.Please purchase the necessary cables at your local store.