24Playback PlaybackENGLISHENGLISHYou can adjust the picture quality and store the setting you haveadjusted on memory 1-5.1) During playback, press [MODE] repeatedly until the pictureadjustment menu appears.• Picture adjustment menu:2) Use [U / V] to select a memory from “Memory 1” to“Memory 5” to store your setting, then press [ENTER].3) Use [U / V] to select a item to be adjusted, then use [Y / Z]to adjust the setting. Gamma correction• To adjust “Gamma Correction”, after selecting the item at step 3,press [ENTER], then use [U / V / Y / Z] to adjust the setting.• In the graph of gamma correction, the horizontal axis indicatesthe brightness level of the image that is recorded on the disc,and the vertical axis indicates the brightness level of the imagewhen it is output from this unit.• When bright points of the disc side are adjusted to the “dark” ofthe output side, the fine parts of the bright portion that normallybecome hard to see, become an easily discerned image.• When dark points of the disc side are adjusted to the “bright” ofthe output side, the fine parts of the dark portion that normallybecome hard to see, become an easily discerned image.4) Press [RETURN] repeatedly to exit.Adjusting the PictureDVD-V DVD-VR DivX®Memory 1Memory 11.Contrast +12.Brightness14.V_Position Control 00 00255255GO : 0 2 4Memory 1 5. Gamma CorrectionNote• This setting is not effective for the picture output from VIDEOOUT and S VIDEO OUT jack.• The setting remains even you turn off the unit.• You cannot adjust the setting during the rapid playback, orwhen the pure direct is set to “Video Off” or “All Off”.• DNR can also be adjusted by pressing