18Playback PlaybackENGLISHENGLISHYou can program the disc to play back in your desired order.1) In stop mode, press [MODE].• The program screen will appear.2) Use [U / V] to select a track/file, then press [ENTER].• For MP3, Windows Media™ Audio, and JPEG, use [U / V] toselect a folder, then press [ENTER] first, and then use[U / V] to select a track/file, then press [ENTER].• Press [CLEAR] to erase the last track/file of the program.• Select “All Clear” at the bottom of the list to erase all thetracks/files in the program.• The programmed track/file is displayed in the right handscreen.• If the entire program cannot be displayed on the screen, “L”or “K” appears.• Use [Y / Z] to going back forward between the hierarchy offolders.• If eight or more tracks/files were set in a program, use theH / G to see all the tracks/files.3) Press B to start program playback.• Program playback will start.This function shuffles the play back order of tracks/files.1) In stop mode, press [RANDOM].2) Press B to start random playback.Note• The chapter/title/track/group repeat setting will be clearedwhen moving to other chapter, title, track/file or folder.• Repeat playback does not function during A-B repeatplayback.• Repeat chapter/title is not available with some scenes.• A-B Repeat can only be set within the current title or currenttrack/file.• A-B Repeat is not available with some scenes.• To cancel the A point which was set, press [CLEAR].• A-B Repeat playback does not function during chapter, title,track, group or all repeat playback.• For some DivX® files, A-B Repeat playback may not function.Program PlaybackJPEGMP3 WMACD1/1MY COLLECTIONAll ClearProgramABCDEFGHIABC1/1Note• During the program playback, press C once to set the resumepoint, and then press B to resume the program playbackfrom where C was pressed (audio CD) or from beginning ofthe file where C was pressed (MP3, Windows Media™ Audio,or JPEG).• During the program playback, press C twice to display theprogram screen. To go back to the normal program playback,press [RETURN] to exit from the program screen, then press B.• Your program is still stored until either the disc tray is open orpower is turned off.• Up to 99 tracks/files can be entered.• To repeat the current track/file in the program, press[REPEAT] repeatedly until “ Track” appears during playback. To repeat the entire program press [REPEAT]repeatedly until “ All” appears during playback.• Even if an inserted disc contains mixed MP3, JPEG andWindows Media™ Audio files, program function allows 99 filesin combination of MP3, JPEG and Windows Media™ Audiofiles.• The current selected number on the front panel display blinkswhile setting the program playback.• “F***” is displayed in the front panel display while selectingthe folder.( *** is folder number.), and file is displayed as“-****”after the folder indication.• Playback from a desired track/ file and random playback arenot available during program playback.Random PlaybackNote• During the random playback, press C once to set the resumepoint, and then press B to resume the random playbackfromwhere C was pressed (audio CD) or from beginning ofthe file where C was pressed (MP3, Windows Media™ Audio,or JPEG).• During the random playback, press C twice to display therandom playback screen. To cancel the random playback,press [RANDOM] when the random playback screen isdisplayed.• To repeat the current track/file in the random selection, press[REPEAT] repeatedly until “ Track” appears duringplayback. To repeat the entire random selection press[REPEAT] repeatedly until “ All” appears duringplayback.• You cannot go back to the previous track/file during randomplayback.• For a disc containing mixed MP3, JPEG and Windows Media™Audio files, random playback of those files will be performed.• “RAND” is displayed on the front panel display.JPEGMP3 WMACDCD-DA 0:45:55Random Program--no indication--RandomTotal