.'-:jB--JPr~ METER.The indicator of the sel.ected channel meter turns green and theoutPlit level of the selecteSelect the channel to display onthe channel level meter-- Channels for which Input selectswiteh is set to "OFF" are skipped.-In the case of bi-amp connection, the indicator of the input-sidechannel meter of the selected channel pair turns green..In the case of a bridge connection, the indicator of the channel meterof the selected channel pair turns green.Turning the Power OffPress POWER.' ., . '. '. > '" .••.• /.. '.J' ',' ... .••.1.rhe power ind.icator lights, red and the power )s set to the,~tandby mode." . . .Turning the Power OnOperations2 Press ONISTANDBY~ .The power indicator flashes in green for several seconds and thepower is turned on. .-kril,.Before tuning on the power, lower the sound volume of the connectedequipment.(j)Press ON/STANOBY.The power is set to the standby mode.@Press POWER.The power indicator turns off, and so does the power.-@!.ji-Power continues to be supplied to some of the circuitry even when thepower is in the standby mode. When leaving home for long periods oftime or when traveling, either press POWER to turn off the power, orunplug the power cord from the power outlet.(;;:....; ....~]I-W-ER---,;=r--ETI=:J-E"""TR--M-ET-J~NJOFFON/STANDBYC);.. IFront panel]""~ -=;~ISet the channel level meterS8t 0r,/OFF vf all ~lli" Inel 18V81 fT1tit81 SrressMETER ON/OFF..~".'>.i1;. .' 011$:*; The channel level meter is illuminated and the channel~~="~ level meter operates. . . .• : The channel level meter illumination and the channelmeter indicator turn off and the channel level meterdoes not ~.rate.•The PRE AMP CONTROL LINK indicator goes off if set to "OFF" withthe AVP-A 1 HOCI connected to the control link.13
