Denon POA-A1HDCI Owner's Manual

Also see for POA-A1HDCI: Product review Owner's manual Brochure & specs Command list Service manual

Contents

Denon POA-A1HDCI Owner's Manual Manual pdf 9 page image

: Used as the second unit when two POA-A1HOCI unitsare connected.: Operates the unit from the AVP-A 1HOCI (~pagen. .•....•~.~.V).'ll~I:·· :. Control m... ode is not used._ lRTh@..""~%jv .: _·f~: Operates the unit from equipment connected'. to the RS-232C connector or TRIGGER IN iaclc(~page12)..liiiili.: for future use, if the range of functions is expanded...."."._.,.~.li!fi~: Used as tile first unit when one POA-A1 HOCI unit is. ), . used or two POA-A1HOCI units are connected.Select MODE.When CONTROL is set td' AVP", the PRE AMP CONTROL LINK indi-cator lights in blue.Use control link to connect POA-A1HOCI and AVP-A 1HOCI and switchPOA-A 1HOCI according to the number of units to be connected.OPTION I 1 I 2 mode selectionUse XLR. terminal.,Use RCA terminal.~:~:~:)'i%t. __ ,':":" '.'•t~i; Channel is not used.-M·n8• When the input and Input select switch setting on the unit aredifferent. the unit does not operate.• If CONTROL is set to "AVP", this setting is invalid.Set how to use the power amp with each channel.Bi-AMP I NORMAL I BRIDGE mode selectionSet the Operation mode select switc;b.·L_---"';./r.."'·-·-~1i _ .'.• !U!t...~: Used. for Bi-Amp connection..' .. - .. -- -- l" .: Ulied forNORMAL connection.,Operation modeselect switch MODEInput selectswitchSettings[Rear panell-M·n8The MODE, CONTROL, Operation mode select switch and Input selectswitch must be set before turning the power on. Settings which arechanged after powering on will not be registered. In such cases, thepower should be switched off and on again.-N·n8• Channels that have the input mode set to "OFF" can not beselected.·If CONTROL is set to "AVP", this setting is invalid.6