Denon RCD-CX1 Owner's Manual

Also see for RCD-CX1: Owner's manual Specifications Service manual

Getting Started Connections Setup Playback Setting the Timer Other Functions TroubleshootingENGLISH Specifications0NOTE• Insert the AC plugs securely. Incomplete connections could cause noise.• When the power cord is plugged into the power outlet, the power indicator flashes orange for about 10 seconds.Do not unplug the power cord before the power indicator turns off and the RCD-CX1 enters Standby mode.• Only use the supplied power cord.• Be sure the power cord is unplugged from the power outlet before connecting or disconnecting it to the AC IN.Wait until all connections have been completed before connecting the power cord.To householdpower outlet(AC 120 V, 60 Hz)Power cord(supplied)Turning the Power On (vpage 12)NOTE• Make sure the AM loopantenna lead terminalsdo not touch metal partsof the panel.• Do not connect two FMantennas simultaneously.n Connecting the AM loop antenna1 Push the lever.2 Insert the conductor.3 Return the lever.AM / FMThe AM and FM reception sensitivity depends on the place the antennais set and the direction in which it is set. Set it so that reception isbest.Antenna terminalsAM loopantenna(supplied)FM indoor antenna(supplied)Connections to Other Devices Connecting the Power CordOnce Connections are CompletedConnectionsNote to CATV system installer:This reminder is provided to call the CATV system installer’sattention to Article 820-40 of the NEC which provides guidelinesfor proper grounding and, in particular, specifies that the cableground shall be connected to the grounding system of the building,as close to the point of cable entry as practical.