ENGLISHGetting StartedConnectionsSetupPlaybackSetting the TimerOther FunctionsTroubleshootingSpecifications[MENU/SET][2/u][5/ENTER][8/i][TIME/DISPLAY]ON/STANDBY[VOLUMEdf]SOURCE1/3ON/STANDBYSOURCE<2/5>1/3Button located on both the main unit and the remote controlunitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manualGExampleHSetting the current time to 10:15 am1PressON/STANDBYto turn the power on.2Press and hold in[TIME/DISPLAY].The time is displayed.3Press and hold in[MENU/SET]to enter time settingmode.“TIME Adj” is displayed for about 2 seconds.4Use[2/u]or[8/i]to set the “hours”.5Press[MENU/SET]or[5/ENTER].The “minutes” display flashes.6Use[2/u]or[8/i]to set the “minutes”.7Press[MENU/SET]or[5/ENTER].The current time is set, and the normal display reappears.TIMEAdjTIMEAdjAM10:00AM10:00AM10:00AM10:00AM10:15AM10:15nChecking the current time when the power is onPress and hold in[TIME/DISPLAY].Press once more and the display returns to its original condition.nChecking the current time when the power is setto standbyPress[TIME/DISPLAY].Press once more, and the standby display is resumed.Displaying the time when the power is set to standby consumeselectricity. To reduce electric consumption, turn the time display off.NOTEThe time cannot be set when in the standby mode. Turn on the powerfi rst.SetupSetupSetting the Current Time(12-Hour Display)