ENGLISHGetting StartedConnectionsSetupPlaybackSetting the TimerOther FunctionsTroubleshootingSpecificationsTuning in Broadcast StationsConnect the antenna beforehand (vpage 10).1Press[TUNER]to select the reception band.FM MONOAMFM AUTOGAbout the displayHWhen “FM AUTO” is selected∙∙∙∙∙∙∙∙∙∙“AUTO” is displayed.When “FM MONO” is selected ∙∙∙∙∙∙∙“MONO” is displayed.When “AM” is selected ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙The reception mode is notdisplayed.2Use[TU –/6,TU +/7]to select the receptionband.When a station is received, the “TUNED” indication will light.• If the function is set to something other than “TUNER”, press[TUNER]to switch the function to “TUNER” (vpage 22 “AutoFunction Selector Function”).• The function can also be switched to “TUNER” using.A humming sound may be heard when using a TV nearby whilereceiving AM programs. If this happens, move the system as far fromthe TV as possible.nTo tune automaticallyPress and hold in<8/–,+/9>or[TU –/6,TU +/7]toautomatically search and tune in broadcast stations.bStations whose signal is weak cannot be tuned in.nTo stop auto tuningPress<8/–,+/9>or[TU –/6,TU +/7].nTo tune manuallyThe reception frequency switches each time[TU –/6,TU +/7]is pressed.TUNER Playback<8/–, +/9>Button located on both the main unit and the remote controlunitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manual[2/u, 8/i,4/o, 6/p][REPEAT/RANDOM][5/ENTER][TUNER][LINE1/LINE2][MODE][TU–/6,TU+/7][CH–/8, CH+/9][2/u, 8/i,4/o, 6/p][PROGRAM/DIRECT][5/ENTER][CLEAR][MODE][iPod13][NUMBER][MENU/SET]About the FM Broadcast Reception Status DisplayWhen the reception band mode is set to “FM AUTO”, the “ST”indicator lights when a stereo broadcast is tuned in.If the signal is weak and stable stereo reception is not possible, select“FM MONO” to receive in monaural.• Broadcast stations whose antenna signal are weak cannot be presetautomatically. If you wish to preset such stations, tune them inmanually.• Onceautopresettingstarts,itcannotbestoppedbeforeitiscompleted. (It takes about 30 seconds for auto presetting to becompleted.)AutomaticallyPresettingFMStations(Auto Preset)Up to 40 stations can be preset.Auto preset is not possible with AM broadcast stations.1Press[TUNER]toselect“FMAUTO”or“FMMONO”.2Press and hold in[MENU/SET].“A.PRESET” flashes.3Press[MENU/SET]again.Broadcast stations are preset automatically.Presetting FM/AM Stations ManuallyUp to 40 stations (total for FM and AM) can be preset.1Tune in the station.2Press[PROGRAM/DIRECT].The minimum number display “P– –” for the unregistered presetflashes.3Select the number to be preset using[NUMBER](0~9,+10) or[CH –/8,CH +/9]and press[PROGRAM/DIRECT].The reception frequency and reception mode are preset.Playback