Denon S-101 Operating Instructions Manual

Also see for S-101: Brochure & specs Service manual Operating instructions Operating instructions Service manual

Contents

42ENGLISHSystem SetupENGLISHSystem SetupThe initial setting that was set prior to shipping from the factory can be changed.The setting contents are maintained until they are next changed even when the power is switched off.3Changing the default settingsPress the CURSOR 0 or 1 button to select thedesired setting icon, then press the ENTER button.VIDEO SETUP:Use this to set this unit screen mode.(“TV TYPE” and “PROGRESSIVE MODE” can be set.)AUDIO SETUP:Use this to set this unit audio output mode.(“SPEAKER SETUP”, “INPUT MODE”, “DIGITAL OUT”,“LPCM”, “COMPRESSION” and “AUDIO DELAY” can beset.)RATINGS:Use this to disable playback of adult DVDs so that childrencannot watch them. Note that playback of adult DVDs cannotbe disabled if the rating level is not recorded on the DVD, butthat it is possible to disable playback of all DVDs.LANGUAGE SETUP:Use this to set the language to be used when playing the disc.If the set language is not offered on that disc, the discsdefault language is set.OTHER SETUP:“CAPTIONS”, “WALL PAPER”, “DIM SENSOR”,“DISPLAY”, “SLIDE SHOW”, “AUTO POWER MODE” and“SCREEN SAVER” can be set.TIMER SETUP:“ONCE TIMER”, “EVERY TIMER” and “CLOCK SETUP” canbe set.“ONCE TIMER” and “EVERY TIMER” can be set if the timeis set at “CLOCK SETUP”.CURSOR buttons0 and 1: Use these to move the cursors (0 and 1) to theleft and right on the screen.• and ª: Use these to move the cursors (• and ª) to the upand down on the screen.ENTER buttonPress this to switch the display.Also use this button to complete the setting.HELP buttonPress this to display the system setup menu.System setup items• Once all connections with other AV components have beencompleted as described in page 10 or 15, make the varioussettings described below on the monitor screen using the S-101’s on-screen display function.• Use the following buttons to set up the system:ENTERCURSORHELP1 Press the HELP button.• The “HELP” menu screen appears.2 Press the CURSOR • or ª button to select“SETUP”, then press the ENTER button.• The “LANGUAGE SETUP” menu screen appears.1 Press the CURSOR 0 or 1 button select“TIMER SETUP” icon, then press the CURSORª button to select “EXIT SETUP”.2 Press the ENTER button.It is also possible to quit by pressing the HELP button.2 To exit the setup mode