186BHT-1300B series4.5.12 USB Communication Settings (DEVICE MENU)Use the following procedure to set up USB communication.[1] Setting up the USB Parameters1. Select “3: USB” at the DEVICE MENU and then press the ENTkey.The USB MENU screen on the right is displayed.2. Use the cursor keys ([▲] [▼]) to select the menu and then pressthe ENT key.Press and hold the BS/C key to return to the DEVICE MENU.“1: SET CONNECT MODE”: Sets up the USB connection mode.The highlighted setting will be the current setting.Use the cursor keys ([◄] [►]) to change the setting, and then press theENT key.“MTP”: Connects in the MTP mode.“COM”: Connects in the COM mode. Point Refer to the following section for the MTP mode.Refer to “4.5.6 [5] Setting the communication environment” for the COM mode.[2] Setting up the MTP Parameters1. Select “MTP” at the USB MENU and then press the ENT key.The MTP SETTING screen on the right is displayed.2. Use the cursor keys ([▲] [▼]) or numeric keys ([1][2][3]) to selectthe menu and then press the ENT key.Press and hold the BS/C key to return to the USB MENU.“1: MTP RESTRICTIONS”: Sets up the MTP RESTRICTIONS screen.“2: MTP FILE SETTING”: Sets up the MTP FILE SETTING screen.“3: MTP DISP FILTER”: Sets up the MTP DISP FILTER screen.Refer to the following section for each of the above menus.MTP SETTING1：MTP RESTRICTIONS2：MTP FILE SETTING3：MTP DISP FILTERUSB MENU1：SET CONNECT MODEMTP COM[ENT]DETAIL
