71Barcode Handy Terminal4.5.3 Downloading Files (DOWNLOAD Menu)Download files to the BHT user area from other devices such as the host computer.- Point - If a file with the same name as one already used in the user area of the target memory inthe BHT is downloaded, the newly downloaded file replaces the old one. If an auto-start execution program has not been specified (See 4.5.6 [1] Setting theauto-start Execution Program), the directory management program will execute the firstmanaged program from among the programs (.PD4) downloaded to the BHT when theBHT power is turned ON. (Program displayed at the top of the “EXECUTE PROGRAM”menu) Take this into account when determining the file download order.Refer to “4.3 Executing User Programs” for details.- Note - A file can also be downloaded via the USBcommunication port with the MTP. Refer to “5.4.2Communication with MTP Connection” for details.Use the following procedure to download files.1. Select “2: DOWNLOAD” at the SYSTEM menu and then press the ENTkey.The screen on the right is displayed.“1: FILE”:Select to download a specific file.“2: HT<-->HT COPY”:Select to download a file from another BHT.Refer to “4.5.5 Copying Files between 2 BHT Units” for details.“4: DRIVE”:Select to download data to the microSD card.Press the BS/C key to return to the SYSTEM menu.The current communication settings display at the bottom of the screen.Communication protocol type YmodemBHT-IrBHTpYmodem protocolBHT-Ir protocolBHT protocolInterface used CrdlIrDAUSBCommunication with the CUIrDA interfaceUSB cableTransmit speed 9600 to 460800 Transmission speed corresponding to eachprotocolRefer to “4.5.6 [5] Setting the communication environment” for details of communication environmentsettings.- MTP -Termination Key:[BS/C] or [C]DOWNLOAD1:FILE2:HT<‐‐>HT COPYF4:DRIVEInternal Memory[Ymodem] IrDA460800Communication protocol typeInterface usedTransmit speed