Denso BHT-1306BWB User Manual

Also see for BHT-1306B: Operator's guide

Contents

Denso BHT-1306BWB User Manual Manual pdf 62 page image

50BHT-1300B series (Example 3) Recommended download methodAfter system initialization, first download the program to be executed simply by pressing the Power key( ). In this case, this program is always registered at the beginning of the system directory managementunless the program has been deleted and another file downloaded.4.3.4 Executing by Wake-upBy specifying the wake-up time at the user program, the BHT can be started up at the wake-up time and aprogram executed.If an auto-start execution program has been selected at the System Mode ”4.5.6 [1] Setting the auto-startexecution program”, the selected program will be executed.If no auto-start execution program has been selected, the first registered program from among theprograms (.PD4) registered in the BHT will be executed.Refer to the “BHT-BASIC Programmer’s Manual” for details.4.3.5 Executing by Remote Wake-upIf remote wake-up is enabled, the BHT can be started up by receiving a control command from the hostcomputer. If a fixed file called “BHTRMT.PD4” exists in the BHT at this time, BHTRMT.PD4 will beexecuted.In other words, it is possible to execute the desired program by chaining from BHTRMT.PD4 using aBHT-BASIC CHAIN statement.Refer to ”4.5.14 Setting the Remote Wake-up (SET REMOTE WAKEUP Menu)” and the “BHT-BASICProgrammer’s Manual” for details.4.3.6 Executing by Auto-Start Execution ProgramBy turning ON the BHT while holding the ENT key, the auto-start execution program is started from thebeginning. This procedure also applies when restarting the operating application from the begging or ifwireless communication is not connected.(1) MAIN.PD4(2) SUBMAIN.PD4(3) AAAAAAAA.DAT(4) BBBBBBBB.DATDownload inthe order (1),(2), (3), (4).:::Directory infoAAAAAAAA.DATBBBBBBBB.DATMAIN.PD4SUBMAIN.PD4:::Directory info