167.1.2 Verification conditionsYou can set a verification starting position and the number of characters to check.- Starting position: The choices are 1st through 7th characters.- Number of characters: The choices are 1 through 7 and everything following the starting position (up to amaximum of 32 characters).For example, you can specify all characters or particular characters of bar code data to check as shown below.Master data12345601Bar code data readable12345601Verification conditions: All characters to checkTo check all characters as underlined at left, for example, set the following:- Starting position: 1st character- Number of characters: All charactersMax. 32 bytes of bar code data can be verified.Master data12345601Bar code data readable01347803Verification conditions: Particular characters to checkTo check particular characters as underlined at left, for example, set thefollowing:- Starting position: 3rd character- Number of characters: 2 charactersNote: If the bar code type (symbology) of data read is different from that of the master data, the verification resultsin a mismatch even if those data matches.
