Denso GT10B-SM User Manual

Also see for GT10B-LM: User manual

Contents

v• When disconnecting the AC adapter from the wall socket, hold the AC adapter body not thepower cable.The power cable may be broken, resulting in a burnt AC adapter, electrical shock, or fire.• If the interface cable is damaged (e.g., exposed or broken lead wires), stop using it and contactyour nearest dealer.Failure to do so could result in a fire or electrical shock.• If you are not using the scanner for a long time, be sure to unplug the AC adapter from the wallsocket for safety.Failure to do so could result in a fire.• During electrical storm activity, always unplug the AC adapter from the wall socket.Exposure to power surges could result in a damaged scanner or fire.• When taking care of the scanner, unplug the AC adapter from the wall socket for safety.Failure to do so could result in an electrical shock.• Do not drop the scanner.The scanner housing may be broken, creating injuries.Using the scanner whose housing is broken could result in smoke or fire.Unplug the AC adapter from the wall socket and contact your nearest dealer.Care and MaintenanceDust or dirt accumulating on the clear plate of the bar code reading window will affect reading performance. If youuse the scanner in dusty areas, therefore, periodically check the clear plate and clean it if dusty.• To clean the plate, first blow the dust away with an airbrush. Then wipe the plate with a cotton swab or the similarsoft one gently.• If sand or hard particles have accumulated, never rub the plate; doing so will scratch or damage it. Blow theparticles away with an airbrush or a soft brush. Limited Warranty on Software ProductsIn no event will DENSO WAVE be liable for direct, indirect, special, incidental, or consequential damages (includingimaginary profits or damages resulting from interruption of operation or loss of business information) resulting fromany defect in the software or its documentation or resulting from inability to apply the software or its documentation.