43(4) Data transmission format and bar code symbologiesItems Parameters Defaults Refer to:EnablePrefix transmission Disable √EnableSuffix transmission Disable √Section 10.3.1 (2)EnableData editing Disable √ Chapter 8EnableTransmission of code ID mark Disable √Before prefixCode ID mark position After prefix √Type 1 (DENSO 1) √Type 2 (DENSO 2)Type 3Type 4Type 5 (AIM)Type 6 (AIM Type 2)Code ID markUser-definedSection 10.3.1 (3)Enable, in 4 digitsEnable, in 2 digitsTransmission of the number of digits(not applicable to UPC/EAN codes)Disable √Section 10.3.1 (4)EnableGTIN format conversion Disable √ Section 10.3.216-digit GTIN format √14-digit GTIN formatConversion type from EAN/UPC/Interleaved 2of5 (14-digit) to GTIN formatDisable conversionSection 10.3.2 (1)14-digit EAN format √13-digit EAN formatConversion type from RSS/EAN-128 inGTIN format to EAN formatDisable conversionSection 10.3.2 (2)Prefix PI in conversion from EAN/UPC/Interleaved 2of5 (14-digit) to GTIN format 0 to 9 0 Section 10.3.2 (1): Can be changed only with the configuration software.
