Denver Instrument PK-Series Operation Manual

Contents

Denver Instrument PK-Series Operation Manual Manual pdf 12 page image

Memory FunctionAll PK-Series balances include a unique memory function that allowscumulative weighing up to the capacity of the balance. Using the memoryfunction requires the following steps:1. After making sure that the balance is on, start by pressing the“TARE/PRINT” key to tare the balance out to zero.2. Place a sample on the pan, and when the displayed weight is stable,briefly press the “ON/MEMORY” key. An arrow appears on the upperleft side of the display. This action adds the displayed weight value tothe value contained in memory buffer, which is initially set to zero, andre-tares the balance so the LCD once again reads “0” (zero).3. Repeat #2, above, as many times as you want until you are ready to seethe cumulative weight of all samples weighed.4. To view the cumulative weight, press and hold the “ON/MEMORY” keyuntil a beep is heard. When the beep sounds, the memory buffer isdumped to the LCD and the total sum of everything weighed is visible.This also clears out the memory buffer and re-initializes it to zero.5. Briefly press “TARE/PRINT” key in order to tare out the balance, and youare ready to proceed with normal weighing operation..If you begin using the memory function, and decide that you donot need to do cumulative weighing at the moment, perform #4 &5 above to jump out of the memory function mode.You cannot switch weighing modes after beginning to use thememory function. If you want to do cumulative weighing using adifferent weighing mode, like pennyweight (dwt), switch to thatweighing mode first, before invoking the memory function.8Memo:Note:Memo:Note: