Desa Comfort Glow CGEFP33NR Owner's Operation And Installation Manual

Also see for Comfort Glow CGEFP33NR: OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL

Contents

3107569OWNER’S MANUALFor more information, visit www.desatech.comPRODUCTIDENTIFICATIONLOCAL CODESInstall and use fireplace with care. Follow alllocal codes. In the absence of local codes, usethe latest edition of The National Fuel GasCode, ANS Z223.1, also known as NFPA 54*.*Available from:American National Standards Institute, Inc.1430 BroadwayNew York, NY 10018National Fire Protection Association, Inc.Batterymarch ParkQuincy, MA 02269UNPACKING1. With utility knife, cut the carton all theway around above the staples on thebottom tray. Lift the carton off theheater. Remove packing.Note: Thehood is located in the packing on theright hand side of the fireplace. Lift thefireplace off the bottom tray.2. Locate two screws above top cornersof the fireplace screen. Remove anddiscard these screws. Lift fireplacescreen up and pull out to remove.3. Remove protective packaging appliedto logs, fireplace floor assembly, andfireplace.4. Check all items for any shipping dam-age. If damaged, promptly informdealer where you bought fireplace.Figure 1 - Fireplace Floor Assembly (EFP33NR Shown)Log SetWall Switch/PlatePiezoIgnitorRemoteControlManualOverrideHandleFigure 2 - FireplaceTop LouverAssemblyFireboxHoodBottom LouverAssemblyScreenAssemblyTop OuterCasingFireboxSupportBlower Assembly(Optional)Manual IgnitionBypass Switch