Dynex DX-15E220A12 User Manual

Also see for DX-15E220A12: Manual Important information Quick setup guide Specifications Información importante

Contents

4 Installing the stand or wall-mount bracketDX-15E220A12Installing the stand orwall-mount bracketInstalling the standTo install the stand:1 Carefully place your TV screen face-down on acushioned, clean surface to protect the screen fromdamages and scratches.2 Secure the stand to the stand column on the TV withthe two screws (B3, 12 mm) provided.Installing a wall-mount bracketTo attach your TV to a wall-mount bracket:1 Carefully place your TV screen face-down on acushioned, clean surface to protect the screen fromdamages and scratches.2 Remove the four screws that secure the stand/standcolumn assembly to the TV (A), then remove theassembly (B).3 Attach the wall-mount bracket to your TV using themounting holes on the back of your TV. See theinstructions that came with the wall-mount bracketfor information about how to correctly hang your TV.TV componentsPackage contents• Remote control and batteries (2 AAA)• Stand with screws• Composite cable• Quick Setup GuideNotes• If you plan to wall-mount your TV, do not installthe stand.• Store the stand and stand screws in case youdecide to use the stand in the future.WarningThis apparatus is intended to be supported by a ULListed wall mount bracket.NoteThe length of the wall-mount screws vary dependingon the wall-mount bracket you purchased. See theinstructions that came with the wall-mount bracketfor screw lengths.2.95 in. (75mm)2.95 in. (75 mm)Wall mount bracket holesHDMI 2 HDMI 1 / DVI VGA PC / DVIAUDIO INY P B P R L - AUDIO - RCOMPONENT INANT / CABLEDIGITALOUTPUTAV INSERVICEPORTVIDEO