Dynex DX-19E220A12 User Manual

Also see for DX-19E220A12: Specifications Firmware update Quick start guide

Contents

Dynex DX-19E220A12 User Manual Manual pdf 15 page image

Making connections 11DX-19E220A12Using coaxial (good)To connect a cable or satellite box using coaxial:1 Turn off your TV and all connected equipment.2 Connect the incoming cable from the cable wall jackto the cable-in jack on the cable or satellite box.3 Connect a coaxial cable (not provided) to theANT/CABLE IN jack on the side of your TV and to thecoaxial out jack on the cable or satellite box.4 Turn on your TV, then turn on the cable or satellitebox.5 Go through the setup wizard on page 18.Connecting an antenna or cable TV (nobox)To connect an antenna or cable TV (no box):1 Turn off your TV and all connected equipment.2 Connect a coaxial cable (not provided) to theANT/CABLE IN jack on the side of your TV and to theantenna or cable TV wall jack.3 Turn on your TV, then go through the setup wizardon page 18.Notes• Use a coaxial cable to eliminate interference andnoise from radio waves.• Do not bundle the coaxial cable with the powercord or other cables.U S BV G AAU DIOH DMIAN T /C AB L E I NAU DIOL RAU DIO O U TP C I NAR CCable or satellite boxSide of TVCoaxial cableNotes• Use a coaxial cable to eliminate interference andnoise from radio waves.• Do not bundle the coaxial cable with the powercord or other cables.• If the antenna is not installed correctly, contactqualified service personnel to correct theproblem.U S BV G AAU DIOH DMIAN T /C AB L E I NAU DIOL RAU DIO O U TP C I NAR CSide of TVCoaxial cable