Dynex DX-19E220A12 User Manual

Also see for DX-19E220A12: Specifications Firmware update Quick start guide

Contents

Dynex DX-19E220A12 User Manual Manual pdf 27 page image

Adjusting the sound 23DX-19E220A12Adjusting the soundAdjusting sound settingsTo adjust the sound settings:1 Press MENU. The on-screen menu opens with thePicture menu displayed.2 Press or to highlight Audio, then press . TheAudio menu opens.3 Press or to highlight an option, then press or to adjust the setting. You can select:• Sound Mode—Selects the EQ sound mode. Youcan select Standard, News, Music, Movie, orCustom.• Surround–Provides the ultimate home theatersound solution.• Treble—Adjusts the high sounds.• Bass—Adjusts the low sounds.• Balance—Adjusts the balance between the leftand right audio channels.• Auto Volume—Adjusts the volume to keep thevolume level consistent when switchingchannels or when switching from a TV show to acommercial. You can select On or Off.• Digital Audio/SPDIF—Selects the preferredaudio format for digital audio signals. Optionsinclude PCM (to output the audio in 2-channelstereo), or RAW (to pass through the originaldigital audio sound).• Audio Language—Selects the default languagetrack when watching digital TV programs.Options include English, Français (French), andEspañol (Spanish).• MTS/SAP—Selects the default language streamwhen watching analog TV. You can select:• MONO–if there is noise or static on weakstereo broadcasts.• STEREO–for programs broadcast in stereo.• SAP–to listen to a secondary audio program(if available).• Reset Audio Settings— Resets all audio settingsto factory defaults.4 Press MENU to return to the previous menu, or pressEXIT to close the menu.Playing TV audio onlyYou can turn off the picture on your TV and listen to theprogram audio only.To play TV audio only:1 Press MENU. The on-screen menu opens with thePicture menu displayed.2 Press or to highlight Channels, then press .The Channels menu opens.3 Press or to highlight Audio Only, then press or to select On.4 Press EXIT to close the menu. After pressing EXIT,the picture turns off in approximately 5 to 10seconds.NoteYou can also press AUDIO to select the audio mode.Picture ModeContrastBrightnessColorTintAdvanced VideoCustom7040600Sharpness 50Backlight 30Reset Picture SettingsSelectMove EXIT ExitMENU BackAdjust settings to affect picture quality.TrebleBassBalanceAuto VolumeAudio Language57500Digital Audio/SPDIFOffEnglishRAWSelectMove EXIT ExitMENU BackSelect a sound mode to achieve idea sound.Surround OffReset Audio SettingsMTS/SAP MonoSound Mode CustomNoteYou can also press MTS/SAP on the remote controlone or more times to select the audio mode.Notes• Audio only works only when the input source isTV and your TV is receiving a broadcast signal.• To exit audio only mode, press any button.When you exit audio only mode, the AudioOnly option is automatically reset to Off.Picture ModeContrastBrightnessColorTintAdvanced VideoCustom7040600Sharpness 50Backlight 30Reset Picture SettingsSelectMove EXIT ExitMENU BackAdjust settings to affect picture quality.Add/Skip ChannelsFavoritesAuto Channel Scan AntennaSelectMove EXIT ExitMENU BackPlay the audio with the picture turned off.OffOnChannel LabelChannel StrengthAuto ZoomAudio OnlyWGBH-SD