Dynex DX-19E220A12 User Manual

Also see for DX-19E220A12: Specifications Firmware update Quick start guide

Contents

Dynex DX-19E220A12 User Manual Manual pdf 8 page image

4 Installing the stand or wall-mount bracketDX-19E220A12Installing the stand orwall-mount bracketInstalling the standTo install the stand:1 Carefully place your TV screen face-down on acushioned, clean surface to protect the screen fromdamages and scratches.2 Attach the stand column to the back of the TV, thensecure the stand column to the TV with the threescrews provided.3 Make sure the wide portion of the stand base facesthe front of your TV. Align the base with the standcolumn, then secure the base to the column with thescrew provided.Installing a wall-mount bracketTo attach your TV to a wall-mount bracket:1 Carefully place your TV screen face-down on acushioned, clean surface to protect the screen fromdamages and scratches.2 Remove the three screws that secure the standcolumn to your TV, then remove the stand column.3 Attach the wall-mount bracket to your TV using themounting holes on the back of your TV. See theinstructions that came with the wall-mount bracketfor information about how to correctly hang your TV.Notes• If you plan to wall-mount your TV, do not installthe stand.• Store the stand and stand screws in case youdecide to use the stand in the future.Locating groovesStand columnScrewStandbaseWarningThis apparatus is intended to be supported by a ULListed wall mount bracket.NoteThe length of the wall-mount screws vary dependingon the wall-mount bracket you purchased. See theinstructions that came with the wall-mount bracketfor screw lengths.3.94 in. (100 mm)3.94 in. (100 mm)Wall mount brackets