Dynex DX-19E220A12 User Manual

Also see for DX-19E220A12: Specifications Firmware update Quick start guide

Contents

Dynex DX-19E220A12 User Manual Manual pdf 7 page image

Important safety instructions 3DX-19E220A12Power sourceOperate your TV only from the type of power sourceindicated on the marking label. If you are not sure of thetype of power supplied to your home, consult anelectrician or your local power company.CautionsDamage requiring serviceUnplug this TV from the power outlet and refer servicingto qualified service personnel under the followingconditions:• When the power supply cord or plug is damaged orfrayed.• If liquid has been spilled or objects have fallen intoyour TV.• If your TV has been exposed to rain or water.• If your TV does not operate normally by followingthe operating instructions. Adjust only thosecontrols that are covered by the operatinginstructions because incorrect adjustment of othercontrols may result in damage and will often requireextensive work by a qualified technician to restoreyour TV to its normal operation.• If your TV has been dropped or damaged in any way.• When your TV exhibits a distinct change inperformance.Outdoor antenna groundingIf an outside antenna or cable system is connected to yourTV, make sure that the antenna or cable system isgrounded to provide some protection against voltagesurges and built-up static charges. Article 810 of theNational Electrical Code, ANSI/NFPA No. 70, providesinformation with respect to correct grounding of the mastand supporting structure, grounding of the lead-in wireto an antenna discharge unit, size of groundingconductors, location of the antenna-discharge unit,connection to grounding electrodes, and requirementsfor the grounding electrode.Note to CATV system installerArticle 820 of the National Electrical Code, ANSI/NFPA No.40 provides guidance for correct grounding. Specifically, itstates that the cable ground must be connected to thegrounding system of the building as close to the point ofcable entry as practical.CondensationMoisture will form on the TV if the TV is brought from coolsurroundings into a warm room or if the temperature ofthe room rises suddenly. When this happens, the TV'sperformance may be impaired. To prevent this, let the TVstand in its new surroundings for about an hour beforeswitching it on, or make sure that the room temperaturerises gradually.Condensation may also form during the summer if the TVis exposed to the breeze from an air conditioner. In suchcases, change the location of the TV.Mobile telephone warningTo avoid interference with your TV picture and sound,operating problems, or even damage, keep your cordlessand cellular telephones away from the TV.End of life directivesYour TV contains tin-lead solder and a fluorescent lampcontaining a small amount of mercury. Disposal of thesematerials may be regulated for environmental reasons.Your TV also contains material that can be recycled andreused.Non-active pixelsThe LCD panel contains almost 3 million thin filmtransistors, which provide exceptionally sharp videoquality. Occasionally, a few non-active pixels may appearon the screen as a fixed blue, green, or red point. Thesenon-active pixels do not adversely affect the performanceof your TV, and are not considered defects.Antenna lead-in wireGrounding clampAntenna discharge unitGrounding conductorsGround clampsPower service groundingelectrode systemElectric service equipment21345671234567NoteThe appearance of the product in this User Guidemay differ from your actual product, and is forexplanatory purposes only.