Dynex DX-40L150A11 User Manual

Also see for DX-40L150A11: Firmware update Guía del usuario Quick setup guide Guía del usuario Guía De Instalación Rápida

Adjusting the sound 17DX-40L150A114 Press or to highlight Component Settings, then pressENTER. The Component settings menu opens.5 Press or to highlight an option, then press or to adjustthe option. You can adjust:• Phase—To minimize horizontal distortion (0~100).• Reset Component Settings—Resets the componentsettings to factory default.6 Press MENU to return to the previous menu, or press EXIT toclose the menu.Adjusting the soundAdjusting the soundTo adjust the sound:1 Press MENU. The on-screen menu opens.2 Press or to highlight AUDIO, then press . The AUDIOmenu opens.3 Press or to highlight an option, then press or to adjustthe option. With the Equalizer Off you can select:• Bass—Adjusts the low sounds.• Treble—Adjusts the high sounds.With the Equalizer On, you can select:• Equalizer Mode—Selects the preset sound mode. Optionsinclude:• Standard (for normal programs)• Theater (for movies)• Music (for music programs)• News (for news programs)• Custom (for a customized sound mode)• Equalizer Setting—Selects the equalizer frequency. Youcan select 120 Hz, 500 Hz, 1.5 kHz, 5 kHz, or 10 kHz. Pressor to switch columns, then press or to adjust thesetting. Press MENU to confirm.You can adjust the following regardless of the Equalizer setting:• Balance—Adjusts the balance between the left and rightaudio channels.• Auto Volume—Equalizes the overall volume levels for allchannels.• Digital Audio/SPDIF—(digital channels only) Selects thedigital audio output mode. You can select RAW (outputsaudio in its original format) or PCM (outputs the audio inPCM mode, if available).• MTS/SAP—Selects the sound mode (analog channels only).Options include:• Mono—Produces a clearer sound if stereo sound isdifficult to hear.• Stereo—Produces dynamic stereo sound for sportingevents and concerts.• SAP—Selects a second language, weather, or addedcommentary, if available.• Audio Language—(digital channels only) Selects analternate audio language, if available.• Reset Audio Settings—Resets all audio settings to factorydefaults. When you select this option, a confirmation boxopens. Press or to select Yes or No, then press ENTERto confirm.4 Press MENU to return to the previous menu, or press EXIT toclose the menu.Playing TV audio onlyYou can turn off the picture on your TV and listen to only the programaudio.To play only the TV audio:1 Press MENU. The on-screen menu opens.ENTER TIXEUNEMPICTURE05esahPReset Component SettingsMOVE SELECT PREVIOUS EXITAUDIO SETTINGS CHANNELSENTER MENU EXITPICTUREModeAdvanced VideoBrightnessContrastColorTintVivid7050600+10SharpnessMOVE SELECT PREVIOUS EXITAUDIO SETTINGS CHANNELSENTER TIXEUNEMPICTUREEqualizerEqualizer ModeEqualizer SettingBalanceDigital Audio/SPDIFOnPCMStandardStereo0ffOemuloVotuAMTS/SAPMOVE SELECT PREVIOUS EXITAUDIO SETTINGS CHANNELSENTER MENU EXITPICTUREModeAdvanced VideoBrightnessContrastColorTintVivid7050600+10SharpnessMOVE SELECT PREVIOUS EXITAUDIO SETTINGS CHANNELS