Dynex DX-L22-10A User Manual

Also see for DX-L15-10A - 15" LCD TV: Setup guide Faqs Guía del usuario User manual

Making connections 9To play from a camcorder or game:1 Turn on your TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select AV2, then press ENTER.Note: You can also press VIDEO twice for AV2.3 Turn on the camcorder or game, and set it to the correct outputmode. See the camcorder’s or game’s user guides for moreinformation.Connecting an HDMI deviceTo connect an HDMI device:1 Make sure that your TV’s power cord is unplugged and the HDMIdevice is turned off.2 Connect an HDMI cable to the HDMI OUT jack on the HDMIdevice.3 Connect the other end of the cable to the HDMI jack on the backof your TV.To play from the HDMI device:1 Turn on your TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select HDMI, then press ENTER.Tip: You can also press HDMI for HDMI.3 Turn on the HDMI device, and set it to the correct output mode.See the HDMI device’s user guide for more information.Note: If the external device has DVI output only, use a DVI-to-HDMIadapter to connect to the HDMI jack, then connect an audio cable tothe VGA AUDIO jack.Connecting a component video deviceTo connect a component video device:1 Make sure that your TV’s power cord is unplugged and thecomponent video device is turned off.2 Connect a component video cable to the COMPONENT OUT jackson the component video device.3 Connect the other end of the component video cable to theCOMPONENT jacks on the back of your TV.4 Connect an audio cable to the AUDIO OUT jacks (L/R) on thecomponent device.5 Connect the other end of the audio cable to theCOMPONENT AUDIO-R and AUDIO-L jacks on the back ofyour TV.To play from a component device:1 Turn on your TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select Component, then press ENTER.Tip: You can also press COMP for Component.3 Turn on the component video device and set it to the correctoutput mode. See the component video device’s user guide formore information.Connecting a computerTip: Some computers have an HDMI connector, which can be used for abetter picture.To connect a computer:1 Make sure that your TV’s power cord is unplugged and thecomputer is turned off.2 Connect a VGA cable to the VGA jack on the computer, thenconnect the other end of the cable to the VGA PIC jack on theback of your TV.Note: The VGA cable should be a 15-pin D-Sub (analog RGB) cable.3 Connect an audio cable to the AUDIO OUT jack on the computer,then connect the other end of the cable to the VGA AUDIO jackon the back of your TV.Note: The audio cable should have a stereo mini plug.To play video from a computer:1 Turn on your TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select VGA, then press ENTER.3 Turn on the computer, then adjust the display properties, ifnecessary.Back of TVHDMI cableDevice with HDMI outputBack of TVComponent video cableAudio cableComponent video deviceNote: Cables areoften color-codedto connectors.Audio cable (stereo mini plugs)D-Sub cable (analog RGB)Back of TVComputer