Understanding the basics 11Understanding the basicsTurning your TV on or offTo turn your TV on or off (standby mode):1 Plug the power cord into an AC power outlet.2 Press (power). Your TV turns on.3 Press again to turn off your TV. When you turn off your TV, itgoes into standby mode.Warning: When your TV is in standby mode, it is still receiving power. Tocompletely disconnect power, unplug the power cord.Note: If your TV does not receive an input signal for several minutes, itautomatically goes into standby mode.Selecting the video input sourceTo select the video input source:1 Turn on your TV, then press the INPUT key on the remote, or theINPUT button on the TV. The INPUT SOURCE menu opens.2 Press or to highlight the video source, then press ENTER.You can also select the input source using the following remotecontrol buttons:• COMP—Press to select Component.• HDMI–Press to select HDMI.• VIDEO—Press once to select AV1. Press twice to select AV2.Press three times to select S-Video.• TV—Press to select TV.On-screen menu overviewPicture menuAudio menuSetup menuChannel menuNotes:Depending on the signal source selected, you may see different options onyour screen. The above menus are shown in TV mode.Menu items that are not selectable are grayed out. Menus in this manualare described in TV mode, unless otherwise indicated.The illustrations and screens shown in the manual are for explanationpurposes and may vary from the actual screens on your TV.Parental Controls