Dynex DX-L40-10A User Manual

Also see for DX-L40-10A: Quick setup guide Guía del usuario Guide de l'utilisateur

Dynex DX-L40-10A User Manual Manual pdf 14 page image

Making connections 11DX-L40-10AConnecting a component video deviceA component (Y, Pb, Pr) picture can be displayedonly when a 480i, 480P, 720P, or 1080i signal isreceived.To connect a component video device:1 Make sure that your TV’s power cord isunplugged and the component video device isturned off.2 Connect a component video cable to theCOMPONENT OUT jacks on the componentvideo device.3 Connect the other end of the component videocable to the COMP1 or COMP2 jacks on theback of your TV.4 Connect an audio cable to the AUDIO OUTjacks (L/R) on the component device.5 Connect the other end of the audio cable to theCOMP1 or COMP2 audio jacks on the back ofyour TV.To play from a component device:1 Turn on your TV, then press INPUT. The INPUTSOURCE menu opens.2 Press or to select COMP1 or COMP2, thenpress ENTER.3 Turn on the component video device and set itto the correct output mode. See the componentvideo device’s user guide for more information.Connecting an S-video deviceTo connect an S-video device:1 Make sure that your TV’s power cord isunplugged and the S-Video device is turned off.2 Connect an S-Video cable to the S-VIDEO OUTjacks on the S-Video device.3 Connect the other end of the S-video cable tothe S-VIDEO jack on the side of your TV.4 Connect an audio cable to the AUDIO OUTjacks (L/R) on the component device.5 Connect the other end of the audio cable to theAV1 audio jacks on the back of your TV.To play from a component device:1 Turn on your TV, then press INPUT. The INPUTSOURCE menu opens.2 Press or to select S-VIDEO, then pressENTER.3 Turn on the S-video device and set it to thecorrect output mode. See the S-video device’suser guide for more information.HDMI3 HDMI2COMP2VIDEO L RAV2RCOMP1AUDIO INVGA VGAL RAUDIO OUTY P B P R L RLL RBack of TVComponent video cableComponent video devicesNote: Cables are oftencolor-coded to connectors.Y = Green cablePb = Blue cablePr = Red cableL RVIDEOS-VIDEOHDMI1SERVICEL RVIDEOS-VIDEOSide of TVS-video cableAudio cableS-video deviceDX-L40-10A_09-0537_MAN_ENG_V1.book Page 11 Tuesday, July 28, 2009 10:07 AM