Dynex DX-L40-10A User Manual

Also see for DX-L40-10A: Quick setup guide Guía del usuario Guide de l'utilisateur

Dynex DX-L40-10A User Manual Manual pdf 18 page image

Adjusting the picture 15DX-L40-10ANavigating the menusSelecting a channelTo select a channel:• Press CH+ or CH- to go to the next or previouschannel on the memorized channel list.• Press the number buttons to enter the analogor digital (main) channel number you want,then wait for the channel to change, or pressENTER to change the channel immediately.• To select a digital sub-channel, press thenumber buttons to select the main digitalchannel, then press the dot (.) button to selectthe sub-channel. Wait for the channel tochange, or press ENTER to change the channelimmediately.Note: Button presses must be within three seconds of eachother.• Press RECALL to go to the last channel viewed.Digital sub-channelsA digital TV signal transmits more data than ananalog signal. This increase in data provides a betterpicture and sound with less static and interference.The increased data capacity also lets broadcasters fitseveral channels into the same bandwidth as ananalog signal. Broadcasters may use thesesub-channels to transmit a variety of information,such as weather forecasts, foreign languages, andcommercials. A digital sub-channel is indicated bythe main channel number, followed by a dot, thenthe sub-channel number. For example, 5.1 indicatessub-channel 1 of main channel 5.Adjusting the volumeTo adjust the volume:• Press VOL+ or VOL– to increase or decrease thevolume. A bar indicator and volume numbershows you the change.• Press MUTE to temporarily turn off all sound.Press MUTE again to restore the sound.Displaying additional informationTo display additional information:• Press INFO to show an information banner. Theinformation banner shows current programinformation such as channel number, videoinput source, and resolution.• Digital mode information–Displays channelnumber, station name, channel label (ifpreset), broadcast program name, TV rating,signal type, audio information, resolution,CC mode, current time, and current programstart and end times.• Analog mode information–Displays channelnumber, channel label (if preset), signal type,audio information, and resolution.• Press GUIDE to display program informationin a window with live program content forthe channel you are watching. Press orto scroll up or down the channels. Each timeyou pause at a channel, the program list willupdate with the program schedule for thechannel and the window will show the liveprogram for that channel. Press GUIDE orEXIT to exit this feature.Adjusting the pictureTo adjust the picture:1 Press MENU. The Main menu opens.2 Press ENTER or . The Video menu opens.3 Press or to highlight an option, then pressor to adjust the option. You can adjust:• .Picture Mode–Lets you select a preset picturemode. You can select Vivid, Standard, Theater,Energy Saving, Sport, or Custom• Brightness–Lets you increase or decrease thebrightness of the picture. Increasing thebrightness can add more light to dark areas ofthe picture, while decreasing the brightness canadd more darkness to light areas of the picture.ENTERMENUEXITENTERENTERPress to display the on-screen menu.Press to select menu items, to adjust selecteditems, or move the on-screen cursor left orright.Press to select the submenuitems.Press to confirm your selection or enter asubmenuPress to close the menu or return to theprevious screen.CustomDX-L40-10A_09-0537_MAN_ENG_V1.book Page 15 Tuesday, July 28, 2009 10:07 AM