Dynex DX-LTDVD22-09 User Manual

Also see for DX-LTDVD22-09: Manual User guide User guide

Dynex DX-LTDVD22-09 User Manual Manual pdf 28 page image

28 Using the DVD playerTo set the digital sound output:1 Press SETUP/TV MENU in stop mode or with no disc inserted.The DVD menu opens.2 Press or to select the Audio icon , then press or orENTER. The Audio menu opens.3 Press or to highlight Digital Out, then press or ENTER.4 Press or to select the setting you want, then press ENTER.Available options include:• Off—No sound output from the DIGITAL AUDIO OUT jack.• PCM—Changes Dolby Digital to PCM output. Choose thisoption when your player is connected to a 2-channel digitalstereo amplifier.• Bitstream—Disc audio bitstream data is output.5 Press SETUP/TV MENU to close the menu screen.Notes:This feature works only during playback of Dolby-Digital recorded discs.Even if you select “Bitstream,” MPEG audio will be output in PCM format.Setting parental controlsSome discs are specified “not suitable for children.” You can limitplayback of these discs on your TV/DVD.To set the password and parental control level:1 Press SETUP/TV MENU in stop mode or with no disc inserted.The DVD menu opens.2 Press or to select the Parental icon , then press oror ENTER. The Parental Control menu opens.3 Press or to select the Parental, then press or ENTER.The Enter Password screen opens.4 Enter “0000” using the number buttons (0-9), this is the presetpassword, then press ENTER. The parental level list opens. If youenter a wrong number, press EXIT and try again.5 Press or to select the setting you want, then press ENTER.Available options include:• Level Off—No control.• Level 8—Virtually all DVDs can be played back.• Level 1—The most restrictive setting.The limitation is more restrictive as the level number decreases.6 Press SETUP/TV MENU to close the menu screen.Notes:The level of dynamic range reduction may differ, depending on the DVD.Depending on the disc, the unit may not be able to limit playback.Some discs may not be encoded with specific rating level information,even though the disc jacket says “adult.” For those discs, the agerestriction does not work.After the rating is locked, the setting cannot be changed unless you enterthe correct password.To set a new password:1 Press SETUP/TV MENU in stop mode or with no disc inserted.The DVD menu opens.2 Press or to select the Parental icon , then press oror ENTER. The Parental Control menu opens.3 Press or to select the Password, then press or ENTER.The Enter Current Password screen opens.Night Mode : OffDigital Out : PCM: OffNight ModeDigital Out OffPCMBitstreamParental : OffPassword : ChangeParental : OffPassword : ChangeEnter PasswordParental : OffPassword : ChangeParental : OffPassword : ChangeEnter Current Password