Dynex DX-LTDVD22-09 User Manual

Also see for DX-LTDVD22-09: Manual User guide User guide

Dynex DX-LTDVD22-09 User Manual Manual pdf 9 page image

Setting up your TV 9Connecting a component video deviceTo connect a component video device:1 Connect a component video cable to the COMPONENT VIDEOOUT (Y, Pb, and Pr) jacks on the component device, then connectthe other end of the cable to the COMPONENT IN jacks on theback of your TV.2 Connect an RCA audio cable to the AUDIO L and R jacks on thecomponent video device, then connect the other end of the cableto the AUDIO L (MONO) and R jacks on the back of your TV. Makesure that you connect the audio cable to the audio jacksassociated with the component jacks you connected thecomponent video cable to.Note: Your TV accepts 480i, 480p, 720p, and 1080i video signals.Connecting an S-Video deviceTo connect an S-Video device:1 Connect one end of an S-Video cable to the S-VIDEO OUT jack onthe S-Video device, then connect the other end of the cable to theS-VIDEO IN jack on the back of your TV.2 Connect one end of an audio cable to the AUDIO OUT L/R jackson the S-Video device, then connect the other end of the cable tothe AUDIO L (MONO) and R jacks that are near the S-Video jackyou connected the S-Video cable to.Note: If you connect an S-Video device and a standard video device to theTV, the S-Video device has priority.Connecting an HDMI or DVI deviceTo connect an HDMI or DVI device:• Connect one end of an HDMI cable to the HDMI OUT jack on theHDMI device, then connect the other end of the cable to theHDMI/DVI IN jack on the back of your TV.• When you connect to a DVI device with an HDMI-to-DVI adaptercable, it transfers only video signal. Separate analog audio cordsrequired.Notes:When using HDMI/DVI to connect your HDMI or DVI devices, you mustselect the corresponding audio input source (HDMI or DVI) on themenu screen (see “To select the HDMI audio input source:” onpage 22). Otherwise, you only see the image with no sound.If you connect an external component (such as a cable box or satellitereceiver) to this LCD TV using an HDMI cable or a DVI-to-HDMI cable,the image will not display if the output resolution of the component isset to 480i. To receive the picture, you must change the outputresolution on the external component.If you need further instruction, contact the manufacturer of the externalcomponent.Connecting a camcorder, game, or VCRTo connect a camcorder, game, or VCR:1 Connect one end of a video cable to the VIDEO OUT jack on thecamcorder, game, or VCR, then connect the other end to theVIDEO IN jack on the back of your TV.2 Connect one end of an audio cable to the AUDIO OUT jacks onthe camcorder, camera, or VCR, then the other end of the cable toAUDIO L/R IN jacks on the back of your TV. Make sure that youconnect the audio cable to the audio jacks associated with thevideo jack you connected the video cable to.Connecting a digital audio deviceTo connect a digital audio device:• Connect one end of a digital audio coaxial cable to the DIGITALAUDIO IN jack on the audio device, then connect the other end ofthe cable to the COAXIAL DIGITAL AUDIO OUTPUT jack on theback of your TV.YP BP RComponent video deviceComponent video cable(not provided)Audio cables(not provided)Back of TVS-Video deviceS-Video cable (not provided)Audio cables (not provided)Back of TVVGAHDMI deviceHDMI cable (type A connector)(not provided)DVI deviceBack of TVAudio cable (not provided)HDMI-to-DVI adapter cable (HDMItype A connector) (not provided)orGameCamcorderAudio cable (not provided)Video cable (not provided)VGADigital audio device(with built-in digitalsurround decoder)To coaxial digitalaudio input jackBack of TVCoaxial digitalaudio cable (notprovided)Coaxial digital audiooutput jackTV/DVDLeftfrontspeakerRightfrontspeakerCenterspeakerSubwooferRightrearspeakerLeft rearspeaker