6 . 1 0 P R O GThe UX8800 has memory spaces for 50 user-savable and loadable programs for each operating mode(Loudspeaker Processor and System Processor).NOTE: The unit will only display programs stored in memory for the current operating mode:System Processor or Loudspeaker Processor.Load Scroll through existing programs stored in the processor memories to find andload the desired program. A program contains information for all processingparameters except for the mute settings. Programs can only be loaded for thespecific operating mode in use.NOTE: While mute settings are not saved, the mute preferences set in the On Prgm Load setting inthe UTIL menu will be used when loading a program.Save Scroll through existing programs stored in the processor’s memories and emptymemories to find a destination to save the current processing parameters. Namethe program to be saved. If a memory with an existing program is chosen,rename the program to be saved. This will replace the existing program savedinto that memory.Delete Scroll through the existing programs stored in the processor’s memories and chooseone to delete. You must confirm deletion before the program can be deleted.6 . 1 1 D E L AYUse the DELAY function to set Input Channel and Output Channel signal delay by selecting the A to D or1 to 8 buttons.Input delay: Normally used to set an overall delay for a loudspeaker or group of loudspeakers.Output delay: Normally used to time align the outputs of a loudspeaker’s individual subsystemsor as an overall delay for a loudspeaker or group of loudspeakers.Select the signal delay up to approximately 1200 ms in one sample (20.83 μs) steps. The delay is displayedin both milliseconds (2 decimal places) and distance (feet or meters according to the units settings).Page 14