EBSInk-Jet Systems® EBS-6100 Printer User's Manual Paragraph 4 - Operating the Printer20070529#20.5 41The request to type in a user password is displayed. Enter from 1 up to 8 characters andconfirm, and then type in the password again in order to certify. The characters input are notdisplayed explicitly. Only asterisks (******) are shown on the display.NOTE: Note that the old password can only be modified (cancelled) when it has beendefined to protect the TEXT SERVICE submenu. Therefore no unauthorisedperson can modify (cancel) the password.Deleting the User PasswordThe user password used to secure the protected commands can be deleted.In the main MENU select the TEXT SERVICE item and then theCREATE/CHANGE PASS item.The user password is displayed but not explicitly (only asterisks are seen on the display).Delete all characters with the ¦ key. The system will confirm the action with thePASSWORD DELETED message and all security features are then removed.NOTE: If the password has been forgotten, you can contact the Manufacturer(distributor) to cancel the password without entering the TEXT SERVICEsubmenu - see section 4.4.5.8 Releasing Protections.4.4.1.10. Using Special RegistersSpecial registers are a specific type of ASCII subfile that are updated after each overprinthas been made. The register settings can be changed with events such as changing date,changing time, detecting an object by a photo detector, receiving a signal from an externaldevice such as scales.The Spec.reg. parameter indicates whethera given subfile is to be a text file or aspecial register. You can find it in theparameter menu of the word processor bypressing the § key.ÖType : TextChar. set : Latin 25x15Typeface : NormalDistance : 2Rotation : NoneSpec.reg. : NoneThe Spec.reg. parameter defines the following special registers:None, Up counter, Down count., Time, Date,Univ.count., Univ. date, Date+offs., Date+offs.2, Spec. chan.NOTE: Up to 6 special registers can be used in one complex text file.Each of them is described in the following section.!!!
