Eaton 5P 750 Installation And User Manual

Also see for 5P 1000: Installation and user manual Installation and user manual

Page 19620-00082-01-us (en)ENGLISH3. Installation3.9 Communication portsConnection of RS232 or USB communication portThe RS232 and USB communication ports cannot operate simultaneously.21561. Connect the RS232 (5) or USB(6) communication cable tothe serial or USB port onthe computer equipment.2. Connect the other end of thecommunication cable (5) or(6) to the USB (1) or RS232 (2)communication port onthe UPS.The UPS can now communicatewith EATON power managementsoftware.Installation of the communication cards (optional, standard on the Network bundle models)3It is not necessary to shutdownthe UPS before installinga communication card.1. Remove the slot cover (3)secured by screws.2. Insert the communicationcard in the slot.3. Secure the card cover withthe 2 screws.Characteristics of the optocouplers communication port (optional) • Pins 1, 3, 4, 5, 6, 10: not used• Pin 2: common (user)• Pin 7: low battery• Pin 8: operation on batterypower• Pin 9: UPS ON, equipmentsuppliedn.o.: normally open contactWhen a signal is activated, the contact is closed between the common (pin 2) and the pinfor the corresponding signal.Contact characteristics (optocoupler)• Voltage: 48 V DC max• Current: 25 mA max• Power: 1.2 W