Eaton 9155 User Manual
Also see for 9PX: Installation and user manualAdvanced user's guideManualAdvanced user's guideUser guide
                            | |
Contents
|
Installation6 Eaton Bypass Power Module (BPM) User’s Guide P-164000628—Rev 2 www.eaton.com/powerquality5. Remove the access panel cover (see Figure 5).Figure 5. Remove the Access Panel Cover6. To wire the BPM, see “Signal Wire Routing” on page 11.7. After wiring is complete, replace the covers removed in Step 4 and Step 5.8. Push the BPM past the front of the rack to allow access for the mounting ears installation.9. Install the mounting ears to the BPM using the provided screws (see Figure 6).Figure 6. Install the Mounting Ears10. Push the BPM into the rack and secure the mounting ears to the rack using the provided screws (seeFigure 7).Figure 7. Secure the BPM to the Rack |
Related manuals for Eaton 9PX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine