Eaton 9155 User Manual
Also see for 9PX: Installation and user manualAdvanced user's guideManualAdvanced user's guideUser guide
                            | |
Contents
|
Installation8 Eaton Bypass Power Module (BPM) User’s Guide P-164000628—Rev 2 www.eaton.com/powerquality6. To wire the BPM, see “Signal Wire Routing” on page 11.7. Connect the UPS to the BPM as shown in Figure 11.Figure 11. Connect the UPS to the BPMWallmount InstallationWallmount Hardwired BPM InstallationCAUTIONl The BPM distributes high density power in a small form factor.l Read the complete installation procedure before beginning any electrical wiring.To install the BPM in a wallmount form factor:1. Select a mounting location for the bypass switch within sight of the UPS.2. Use the provided wallmount brackets to firmly secure the BPM to the wall (Figure 12).Output to UPSMain Utility InputInput from UPSNOTE The bypass switch should be mounted securely to a sturdy surface. You may needto turn the cabinet 90 degrees (on its side) to enable operator access to the switchhandle. |
Related manuals for Eaton 9PX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine