Eaton 9E Installation And Operation Manual

Also see for 9E: Installation and operation manual Installation and operation manual Installation and operation manual Manual Manual

Contents

Eaton 9E UPS (20–30 kVA, 208/220V) Installation and Operation Manual 164202124—Rev 2 www.eaton.com/powerquality 5-1Chapter 5 Understanding UPS Operation5.1 UPS System OverviewThe Eaton 9E UPS is a continuous-duty, solid-state, transformerless, three-phase, true online system thatprovides conditioned and uninterruptible AC power to the UPS system's output and critical load.The basic system consists of a rectifier, battery converter, inverter, monitoring/operation control panel,integrated communication server, and digital signal processor (DSP) logic. Figure 5-1 shows the main elementsof the UPS system.If utility power is interrupted or falls outside the parameters specified in Chapter 9, “Product Specifications,”the UPS uses a backup battery supply to maintain power to the critical load for a specified period of time oruntil the utility power returns. For extended power outages, the UPS allows you to either transfer to analternative power system (such as a generator) or shut down your critical load in an orderly manner.Figure 5-1. Main Elements of the UPS SystemThe emergency bypass consists of a continuous static switch, and a backfeed protection relay. The backfeedprotection relay is located in series with the static switch. The static switch is armed and ready during normaloperation.AC Input toRectifier/ChargerAC Outputto CriticalLoadInputBreakerInputRelayBatteryRelayBatteryConverterBatteryOutputRelayUPS CabinetBackfeedProtectionRelayStaticSwitchDigitalMeteringInverterRectifierPower ModuleAC Input toBypass