Operation OverviewEaton Advanced ePDU User’s Guide P-164000042—Rev 1 www.eaton.com/ePDU 40Menu and Status DisplayThe LCD provides information in English about the ePDU and connected devices using white text on a bluebackground. The LCD window flashes orange when any alarm is active.Basic configuration of some settings is available through the LCD. Full configuration of all settings is availablethrough the remote interfaces. For more information about configuration, see Chapter 4, “NetworkCommunication Configuration” on page 26.LCD WindowThe LCD has three modes:l Screensaver mode (startup screen)Screensaver mode cycles through a set sequence of screens that display the following information:- ePDU frequency, power, and current- Phase power and current (for three-phase models)- Outlet group power and current- Environmental measurements (with the optional EMP installed)l Settings mode (LCD main menu)The menus that display depend on your ePDU model. For more information about the menus and settingsfor your model, refer to Chapter 6, “LCD Operation” on page 57.l Energy Saving mode (dark screen)Turning the backlight off conserves energy but darkens the screen. Pressing any of the navigation buttonsturns the backlight on. An active alarm also turns the backlight on. The LCD automatically turns off after 15minutes if no button is pressed.Figure 30 shows the LCD window and navigation buttons.Figure 30. LCD Window and Navigation Buttons
