Eaton Advanced Enclosure Power Distribution Unit (ePDU) User Manual

Contents

Operation OverviewEaton Advanced ePDU User’s Guide P-164000042—Rev 1 www.eaton.com/ePDU 54ePDU Settings TableTable 13 provides ePDU parameter settings.Dry Contact Name User-defined friendly name.Maximum 31 characters.Default is Contact xWhere x = the contact numberDry Contact Alarm Control–Open state Indicates if an alarm must be set when the dry contact is in the open state.Informational: no alarm is set when the dry contact is open.Alarm: an alarm is set when the dry contact is open. The active alarms presence icon is displayednear the dry contact state.Dry Contact Alarm Control–Closed state Indicates if an alarm must be set when the dry contact is in the closed state.Informational: no alarm is set when the dry contact is closed.Alarm: an alarm is set when the dry contact is closed. The active alarms presence icon isdisplayed near the dry contact state.Table 13. ePDU SettingsName DescriptionePDU Friendly Name User-defined friendly name of the ePDU to identify it throughout the LAN.Maximum 31 characters.Default is ePDU.Phase Current High Warning Threshold High warning threshold for the phase current in A.In the range [0-655].Phase Current High Warning Threshold < Phase Current High Critical Threshold.If the measurement exceeds this limit:l An alarm is setl Traps are sent to configured receiversl E-mail is sent to configured receiversl The high warning icon is displayed near the measurement value in the Web interfacePhase Current High Critical Threshold High critical threshold for the phase current in A.In the range [0-655].Phase Current High Critical Threshold < Phase Current High Warning Threshold.If the measurement exceeds this limit:l An alarm is setl Traps are sent to configured receiversl E-mail is sent to configured receiversl The high critical icon is displayed near the measurement value in the Web interfacePhase Voltage Low Warning Threshold Low warning threshold for the phase voltage in V.In the range [0-655].Phase Voltage Low Warning Threshold < Phase Voltage Low Warning Threshold.If the measurement is under this limit:l An alarm is setl Traps are sent to configured receiversl E-mail is sent to configured receiversl The high warning icon is displayed near the measurement value in the Web interfaceTable 12. Environment Settings (Continued)Name Description