Web Interface OperationEaton Advanced ePDU User’s Guide P-164000042—Rev 1 www.eaton.com/ePDU 73Enable/Disable the SNMP Agent1. Access the Web interface and log in.2. Open the SNMPpage.3. Choose one of the following SNMP versions:l Disabled: the agent is disabled; the MIB cannot be read and no traps are sent.l SNMPv1: only SNMPv1 users and SNMPv1 traps are supported.l SNMPv3: only SNMPv3 users and SNMPv3 traps are supported.l SNMPv1 & v3: both SNMPv1 and SNMPv3 users and traps are supported.4. Click Save.Define SNMPv1 Users1. Access the Web interface and log in.2. Open the SNMP page.3. In the SNMPv1 field, select the SNMPv1 user to configure from the combo box.4. Type the SNMPv1 community name (user name) you intend to use to access the MIB objects.5. Choose one of the following access rights for the SNMPv1 user:l No access: the SNMPv1 user is disabled with no access to the MIB objects.l Read-Only: the SNMPv1 user can only get the MIB objects.l Read/Write: the SNMPv1 user can get and set the MIB objects.6. Click Save.Define SNMPv3 User-based Security Model Users1. Access the Web interface and log in.2. Open the SNMP page.3. In the SNMPv3 field, select the SNMPv3 user to configure from the combo box.4. Type the SNMPv3 user name.5. Choose one of the following access rights for the SNMPv3 user:l No Access: the SNMPv3 user is disabled with no access to the MIB objects.l Read-Only: the SNMPv3 user can only get the MIB objects.l Read/Write: the SNMPv3 user can get and set the MIB objects.6. Choose one of the following security levels to be applied to the SNMPv3 user:l Not Set: The SNMPv3 user is not configured and therefore disabled.l No Auth No Priv: No authentication password or privacy key are required to access the MIB objects.l Auth No Priv: An authentication password but no privacy key are required to access the MIB objects.l Auth Priv: An authentication password and a privacy key are required to access the MIB objects.7. Type the authentication password (if required by security level), with 8 to 24 characters allowed.8. Type the privacy key (if required by security level), with 8 to 24 characters allowed.9. Click Save.
