Eaton CROUSE-HINDS GBXE Operating Instructions Manual

Also see for Crouse-hinds series: Operating instructions Instruction manual Operating instructions Operating instructions Instruction manual

Contents

Eaton CROUSE-HINDS GBXE Operating Instructions Manual Manual pdf 7 page image

7Explosion-protected empty enclosure GBXE GB1 Technical data1.1 Empty enclosure2 LegendeWarningThis symbol warns of a serious hazard. Failure to observe thiswarning may result in death or the destruction of property.Attention:This symbol indicates a possible failure. Ignoring this warning canlead to the total failure of the device, system or operation to which itis connected.Note:This symbol stresses important information.2.1 Safety instructionsThe operations shall be carried outby qualified, instructed electricians or qualified personnelaccording to IEC/EN 60079-14 and engineering/develop-ment specialists according to IEC/EN 60079-0.The requirements of the IEC/EN 60079-31 regarding excessive dustdeposits and temperature to be considered from the user.These empty enclosures GBXE may not be used in hazardous areaswithout full certification. Even if they are fully certified, they are notsuitable for use in Zone 0 and Zone 20.After apparatus/terminals have been installed in the empty enclo-sure, it shall be tested and fully certified by a testing authority orauthorized person.They shall be used for their intended purpose and in perfect andclean condition.Once Installed do not dismantle except for occasional inspection.The empty enclosures GBXE shall only be used where temperatureat the point of entry is between (- 50 °C to +100 °C).EU type examination certificate: TÜV 18 ATEX 8239UMarking acc. to 2014/34/EU and standard:EN 60079-0 II 2 GEx e IIC GbII 2 DEx tb IIIC DbIEC Ex type examination certificate IECEx TUR 18.0033UMarking:IEC60079-0 Ex e IIC GbEx tb IIIC DbPerm. service temperature: -50 °C ... +100 °CPerm. storage temperature in original packing: -50 °C ... +100 °CImpact resistance acc. to IEC/EN 60079-0: 7 JProtection category acc. to IEC/EN 60529: IP66 (catalogue version)Insulation class acc. to IEC/EN 61140: IIEnclosure material: GRP (Glass fiber reinforced plastics)Enclosure color: Black ( Similar to RAL 9011)Test torques:Cover screws: M4 1 - 2 NmM6 2- 4 Nm