Eaton E.T.N 1500 VA - 60kVa Reference Manual

Also see for Powerware 5125: Brochure & specs User guide User guide User guide User guide

Contents

9www.powerware.com 1.800.356.5794Eaton’s connectivity products are accessory hardware options used to provide Powerware UPS products to external communication devices. Weoffer a variety of connectivity products to ensure communication compatibility with a variety of external devices through the Web, serial, USB, relays,or SNMP.ConnectUPS Web/SNMP DevicesSOLUTIONS FOR THE CHANGING GLOBAL CUSTOMER LANDSCAPEThe ConnectUPS-X, ConnectUPS-BD, and ConnectUPS-E Web/SNMP devices are designed for therigorous task of managing the UPS that protects equipment and the critical data residing throughoutthe network.Powerware Expansion Chassis & Modbus CardINCREASING THE FLExIBILITY OF UPS MONITORING & MANAGEMENTThe Expansion Chassis is a three-slot peripheral device that expands communication methods for a UPS through its support for X-Slot cards. It is pre-configured with the Powerware Modbus card, which serves as the interface to Modbus networks and as the integral communications controller forthe other two slots.Multi-Server Card & Relay Interface CardsOUT-OF-BAND COMMUNICATIONS AND NOTIFICATIONOF UPS ALARM STATUSThe Multi-Server Card provides out-of-band serial communications with Powerware LanSafe software when Ethernet connectivity is not availableor required. Load segment control is mapped to specific serial ports on the card to provide selective control over critical loads. The Relay InterfaceCards provide simple alarm notification via isolated contacts to signal remote alarm panels or security systems in the event of a change of state inUPS operation.CONNECTIVITYConnectivity ProductsFeatures and Benefits• Monitoring via Web (computer, PDA, or cell phone) or via SNMP (NetworkManagement System) provides easy, anytime, anywhere access• Built-in three port switching hub (in X-Slot version) adds three10/100 Mbps power connected network connections with no additionalexpense• Alarm notification through any combination of e-mail, SNMP traps, ornetwork message speeds corrective action• Integrated NetWatch Client software provides graceful, unattendedshutdown of computer operating systems in the event of an extendedpower failure• Powerware MultiView software provides simultaneous UPS monitoringthrough multiple ConnectUPS-X, -BD, and -E cards from a single computerconsole• SSL and SSH encryption and authentication• Automatic local language detection and support; Spanish, Chinese,German, Italian, French, and Portuguese among othersFeatures and Benefits• Creates an array of communication options for Powerware UPSs• Serves as the framework for protocol conversion via compatible X-Slotcards to: Modbus, SNMP, and HTTP• Add expanded communication support for a wide range of UPS models:Powerware 5115, 5125, 9120, 9125, 9170+, 9315, and 9355• Flexible mounting options (via included feet, rack or wall-mounting kits);redundant power inputs• Alarm notification speeds corrective action through any combination ofe-mail, SNMP traps, or NetWatch Client software• Compatible with X-Slot cards: Modbus Card (one included), ConnectUPS-XWeb/SNMP Card, Single Port Serial Card, and Multi-Server CardFeatures and Benefits• Provides out-of-band communication methods via RS-232 serialcommunications or isolated Form-C relay contacts• Multi-Server Card connects up to three servers for monitoring andgraceful shutdown; supports load segment control and RS-232 signals forlow battery and AC Fail• Relay Interface Card provides isolated dry contact Form-C relay outputsfor Utility failure, Low battery, UPS alarm/OK, and On bypass• User-selectable normally open (NO) or normally closed (NC) contacts• Shutdown function to remotely shutdown UPS in the event of anemergency• IBM AS/400 computer port (DB-15)• Terminal block outputs available on X-Slot card• Works with any Powerware UPS equipped with an X-Slot communicationbay, in addition to the Powerware 9120 and Powerware 9170+